i have a 50 champion and i was wondering if theres any difference in a 50
bullet and a 51 bullet...thanx

im sorry i worded that terribly.i was wondering if there is a difference in
the actual chrome bullets on the 50 and 51 champion.?willthe two billets
interchange?thanx again.sorry for the bad worded question.

I learned a new internet word today.
It wasn't directed at me (but there's always a chance on this NG <g>)
Fidiot
Kind of like the ring of it <g>

Help! I need the following parts-radiator core support-1336875P and
mounting bar
-1337231P and balance weights 1337264P and 1337265P and the bottom
part of the back seat(frame and springs only will be OK). I would also

Anyone have one to sell?  If so, give Richard Lawler a call.  His number is
713-494-3488     Richard is the one that his truck conked out that Bob K told
us about.
Ted

Can anybody here give me the length of the input shaft on a Stude V-8
5speed truck transmission, measured from the trans mounting face to
the tip of the shaft? and the length of the throw out bearing sleeve?
Thanks.

Thanks to some help from some in the newsgroup, I have found the Gabriel
Shocks (Red Ryder Gas). Front are #82087, and rear are #82103.
My local Auto-Zone says they are $14 each. That includes shipping.<G>
(There are really no shipping charges)

Hi NG'ers
I just got back from Barrett Jackson. It was my first time there and
it is quite a show. Everything under the sun is there and plenty of
places to spend money. Several jewelers were there: my thinking, after

Our  Bonneville project will need hydraulic clutch and brakes with hanging
pedals (no room under the floor any more....).  Anybody have an idea which
boneyard unit will go in fairly easily?  We will be fabricating a new dash
and could add some bracketry off the 8 point roll cage ...

Does any one know if ther are any unofical drags set up on the Friday after the
Concourse? That was a great time at South Bend.

IT HAS NO VALES OR SPRINGS JUST A BEAR 289 HEAD
WHat is a BEAR head and why doesnt it have any VALES ???
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34202&item=245
5767239
Studa-da-da-da-baker

  This one is a winner:
------------------------------------------------------------------------------------------------------

Due to recent activity on your account we need you to update your

  The first time the guy ran this boat with a $1000 starting bid I
e-mailed him to let it know it has nothing to do with the car company.
It's back, now at $650, but still hyping the Studebaker factory
connection. I trust we won't see it hauled to a Studebaker meet by a

Anyone else think the interior on this M series is a bit over the top
for a flatbed work truck ?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6466&item=2455
346478