We just went up to pick up the HFH, and when we got there, the owner was
tearing his hair out, and now I am doing it.
The Upper Control arm litterally ripped itself from the frame. it took with it,
the bolts and the two holed cross piece that adjusts the toe in or camber or

Saw about half of tonights Overhaulin, they did an old Falcon.  Neat
little car when they got it done (too much stereo though).
Any one have any idea why they would have painted the car flat blue?
Jeff DeWitt

Who ever makes the custom spark plug wires; please e-mail me off group with
you phone #.  I need a couple of sets, one special made..
Thanks
Ron Butts

I'm looking for a couple of water-slide decals to fix some serial tags
I have that the lettering is mostly gone. I need the decal that fits
the 1950 style tag, that is aprox 1 by 5 inches....Bondo Bill only has
the later style...any thoughts of where I could find a couple of the

1946 Prewar Willys powered Studebaker!
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2494476149&ca
tegory=6466

(from another group)
The State of California Targets Street Rod Owners for Potential Fraud
By Brian Brennan
On Wednesday the 6th of October, 22 law enforcement agents and other

Swapped out my Prestolite points and put in Flame thrower and Petronic
system, simply could not get the timing to stay right.  Time it one
day and out the next, made me nuts so going back in with the good old
points, which never really gave me a problem.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6472&item=
2493423929&rd=1
Looks like a first class resto that needs finishing.To bad some A-hole stole
the shifter knob.NICE car!

Someone should do this to a Lark.....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2494072164&ca
tegory=31863

OK, so I now have in my posession a MoPar 383/400 electronic distributor.
It looks like all I have to do is to disassemble it, cut the shaft to
length and drill it for a roll pin for the drive gear, correct?  Anyone
done this before?  I'd like to put the guts into a spare single ...

Leaving South Bend monday morning heading to Vail Az. to get my new
Studes. Have a empty 16 foot flat bed and 18 foot trailer. Any one
need something hauled out that way?
James Maxey III

Does anyone know anything about Motocross jackets. Are they supposed to be
thick heavy leather?
I had a sample made with STUDEBAKER sewn across the back and the Lazy S sewn on
the chest area. I had them make the sample in my size and its heavier than a

Mike Dotson in Montana has a NOS Packard (Cadillac) "batwing" air
cleaner FS. Item # 2492473686. Man I love those things. I have no
money. Big problem. I will trade my nearly perfect, freshly rechromed
R-1 air cleaner for that NOS bat wing unit. The Packard unit has an

Hello Again From Austin,
How does one disconnect the interior door handles and window cranks on
the '62 Hawks?   I have seen a special tool advertised in S.I.     The
NAPA down the block has one that looks the same.    Will the basic GM