(Disclaimer: Without showing disrespect to any religious, political,
sociological, disaster, or ANY non Studebaker
event.......................................................................)
What a Studebaker year!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4515727229&ca
tegory=63735

Anyone out there remember the Stude dealer in Ridgewood, New Jersey?
Chris Gerrity Ridgewood,NJ

I just saw the Aviator with my 13 yr old son last night , it was
great. I recommend seeing it before it is on video/DVD. The aerial
scenes in Hells Angels were excellent. It is a must see on the big
screen.

Spend the last 3 Days talking to HP about a printer problem and of course
they want you to prove to them that it's their printer and not our rip or
our network or our server or so on and so on. . . Yet the printer screen say
it having errors. And of course the expensive part $2 ...

Question for the historians in the group..
In reading the Pierce Arrow article in this month's issue of TW...
It is mentioned that the company took over the dealership in Detroit and
made it a factory store.

I'm thinking of PC upgrading and going to Linux while I'm at it.
Is there any good guide to Linux pros & cons, what to look for, buying
vs free and so forth?
Will I be able to bring my old files over, perhaps via disk?

  Have a party, no reserve. <g>
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7944792103

I purchased an old car radio for the 49, put a bid on it, starting bid at
$25.00, won it for $25 and the listing has a shipping calculator for USPS
priority mail. I enter my zip and it spits out $20.70 so I email how much
would it be for parcel post or UPS ground, the reply was $75 ...

Anyone know if I should be able to find 289 crankshaft end play shims at the
local auto parts store?  Do they interchange with any other model?
1928  Dictator
1958 Golden hawk

A SUPER feature on The Plain Brown Wrapper -Cousin George Krem's 1964
R3 Challenger 2-door- is the topic of Page 74's "Weekend Warrior" by
Columnist George Mattar in the February 2005 Hemmings Muscle Machines.
Full color, with a shot of Ted leaving the line in the car at The Pure

I sold this car to Avanti Motors over two years ago to pay for my daughter's
wedding.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4515386
849&category=6466

I'm assembling my Fiat engine.  All 47 cubic inches of it.  There are two
oil rings, one above the wrist pin and one below.  The oil rings have bevels
on one outside edge.  I'm guessing the bevels should go up so the sharp edge
scrapes oil down.  Do I have it right?

Look at all the pics in this ad.There is Stude content.
http://cgi.ebay.com/ebaymotors/ViewItem&item=4515431657
I contacted the owner of the cars and will probably make the wild goose
chase this weekend.

Can anyone point me in the direction of a NOS or a solid used one that
will stand an acid dip? I need it for my 56j restoration. Thanks in
advance