I don't know... but I would have probably used a different person to model
next to the car if I was trying to sell it.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6466&item=4541
575188
Lee

These are pretty neat...
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4541579160&ca
tegory=34207>

My father in law is in town visiting this week, so I delayed my departure a
bit.
Tonight the wife suggested we go out to a favorite place to eat...and she
said I should drive the truck.

Saw this on a hot rod discussion board (if you are interested and don't want
to register at that site to get the guys email address, email me and I'll
get it for you):
http://www.jalopyjournal.com/forum/showthread.php?t=51001

   I had always planned a budget build for what will be a R2 4peed 2
door Challenger, but I'm really going to cut some money out of this one.
I was going to spend $800 or so to have it media blasted, than maybe a
MAACO paint job. I decided to try D-A sanding the paint and it ...

Does anyone have a rebuildable 2 barrel carb that goes on top of a 283
in a 66 Studebaker? If so, send me the information and cost to send to
George so he can work his magic on it.
Thanks,

I was working on trying to find the power steering leak on my sold '64
Avanti that I reported yesterday.  It doesn't seem to be leaking today.
Anyhow, the shop manual mentions not tightening the wing nut too tight
(finger tight) because it will clog the vent which I guess is the ...

I have a 1963 R2 Avanti, when I drive it it pumps oil from the breather
tube into the air cleaner. It has an R3 setup on it. The engine seems to
run strong but I am wondering if I have a problem in the vacuum system.
While holding a constant speed the vacuum gauge reads about 10 p.s ...

Tomorrow is another 50 cent insertion fee sale. Time to unload the extra
crap around the house.

Beautiful white 4-dr Avanti spotted on fwy. in Houston, but had gold
Masertati nameplates, & did not say Avanti on it anywhere. Anybody seen or
heard of this car? I wonder if it is Maserati powered?

In an article in Old Cars Weekly
Studebaker-Packard has lost $85 million since 1954 and will bleed
another $11 million this year. Bankruptcy is so close it is feared that
the company may not have cars for dealers to sell. S-p officials

http://www.moviefever.com/movie121 << Awesome Movie!
You can reply with your comments
about the movie if you would like.

I have never seen a GT painted this way, although there was one at York
not too much different!
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dllViewItem&rd=1&item=4541214581&cat
egory=6466
Dan

I have a Press-yo-luck distributor on my 289.   I need to find out if
the Prestolite is a  full-time vacuum advance distributor.    The
Edelbrock Performer 1406 has a full time and metered vacuum ports.
Edelbrock's email tech support says that the metered port is the

Thanks to Keith Barriat and Jeff Rice,my new manifold arrived.Looks good
Jeff.Haven't figured out which one of my cars Im going to try it on.Got a
rebuilt Stromburg  from T-Bow on the Hawk so Ill see how she runs with that.
Also got my window sticker from Richard Quinn,very nice ...