Nice Speedster on Ebay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4546029041&ca
tegory=7251

A buddy of mine here in western Washington has a '48 SLC and needs two
wheels.  He says the old ones are too rusty to trust on a long drive and I
can't remember if it's a Champion or Commander, if that would make a
difference.  He's Don Andersen at djandersen(at)juno.com and thanks, ...

Help Grumpy avoid becoming grumpier!
Seriously, I am in need of both, a complete striker plate setup and door
latch  for a T-Cab/59-60 Lark. including the screws and sticker backing
plates.

This is our first trip to the South Bend meet(s). I understand that there
are 2 going on at once?
One at Sasco, and another at the fair grounds. Are there vendors at both
spots? Where's the hot spot for the good early deals? Is there much

While working at home today, I finished up a few technical articles, and
updated the NCSDC Website.
I have added the Headliner Installation Technical page, and
modified/finished the article on Typical Front Fender repairs..

I've sold quite a few magazines, but I have LOTS more... If you want to
see any examples of the articles- just let me know and I'll scan them.
Cars & Parts: May 1980- 1956-1958 Studebakers. 7 pages,  many pics ; The
Hostory Of Pierce (Arrow) 7-pages; $4

How do you bench check a 2 wire 64 soleniod.  I can check a 3 wire OK
but either this one is bad  - or I don't know how to check it. I have
the matching governor too, if that helps.   It's used - how much is it
worth,, that is, if it is any good?

   The paint is all off, minor dings and one dent filled and spot
primed down low on the lift.
Pix:
http://stude.com/wrapper/step1.jpg

     I especially like the last sentence...
     Jeff ("Sorry honey, I won't be home for supper... Have to work late,
you know..") Rice
     Strip Club Raid Lands Eight In Jail

test 6 of a billion

on Speed Channel just wrapped up with a feature on the 1930 Caddy V-12.
A magnificent car, no doubt.
But they said the cost of the restoration was between $300,000 and
$400,000!!!!

Here's a link to a discussion of the term billet on a machinists bulletin
board.
Scroll down to about the 10th post
(by Forest Addy) for the best explanation/definition of the overused term

I mentioned that our chapter made a great showing at a local car show
in Selma, NC.  Check out this site for the pics. Most of our cars are
in the first gallery, but a member's Packard is in the 3rd gallery.
Also not that the Stat Highway Patrol was present at the show with a

Anyone seen this supposed "Executive President", or "Hawk" emblem on
eBay?
http://cgi.ebay.com/ws/eBayISAPI.dlll?ViewItem&Item=6527752210&rd=1&sspagename=S
TRK%3AMEWA%3AIT&rd=1

Test 1 of probably 10 at my rate.....