I've been sorting out the Weber Carbs and thought I had it pretty close
yesterday, although still pretty rich.
Took in on  a speed run at my favorite  fairly deserted stretch of
country road. That run was pretty disappointing as it was no faster than

I will be taking a 64' Cruiser to my driveway in the next 2 weeks. I
can pull parts off for anyone who has needs.  The following will not be
available:   Drivetrain, trunklid, tail light assys.  R/A, brake assys,
, and a few other things....I am only saving

I asked about C /K's the other day but now I really have a mess with the old
rotten headliner in my 62 Lark hardtop.It had holes before but over the
winter the rear part fell into the back seat.
Do you have to take out any glass to do a Lark?

Installed a new pump in my 64 daytona. Was only getting juice out of
one lead from the switch. So, the switch would only activate the pump
to bring the top up. Took the switch apart, cleaned the contacts and
tested it. Wow. It worked...till I reainstalled it into the dash frame.

I stumbled across these on Ebay...don't recognize the seller but they
sure look nice!!
"http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7970692878&ca
tegory=33627"

I'm having a problem with the NC DOT. They have an "easment" across my
side yard- to allow for road drainage of rainwater etc... Anyway, it
goes the entire length of my side yard- about 90'. When my home was
built, they put in landscape fabric, and rock (rip/rap is the southern

Does anyone out there have a 289 crank for sale.  I am trying to finish
building an R2 engine for an Avanti I am going to sell and it is one of
the parts I'm lacking.  Please let me know.
Nimesh

Sorry if this is a repeat, but it doe not seem to have posted the first
time.
I need the light that clips onto the cagarette lighter.   There is a
cigarette assembly on ebay that has one.  It seems a waist to get the

These are the brakes with the cams at both ends of the shoes.  :-(  I
adjusted per the book but am still not happy with braking.  Kinda soft.  I
was going to use my suction pump thing to pull air out of each wheel cyl.,
should there be a few bubbles.  Otherwise is it just a matter ...

Anyone have a good close up pic of the Daytona flags on the rear sail panel
on the 64 daytona or possibly on the front fenders of the 57 Silver hawk...
David

Quick Time slide show of the April 15, 16 Georgia State Meet trophy
winners.
http://www.studebakerclubs.com/NorthGeorgia/StateMeet/2005GAStateWinners.mov

Just a short note to let everyone know that although I can get e-mail
and post here, I can't reply to e-mails until I get back. I just
hooking up to anyones unsecured connection I find. <g>

Does anyone have an opinion on what are the best plugs to run in my 63 R-2
Avanti???

Anybody have a good rear bumper for my 64 commander they want to part
with?????

I could use your collective assistance.  We are moving at the end of
June from Harrisburg, PA to Richmond, VA.  The house is sold and we
need to clear out, including our '63 Avanti and '66 Cruiser the day
before closing which will be on a Friday.  We won't be able to get into