A surprising number of these survive...
http://cgi.ebay.com/ebaymotors/1958-Packard-2-Door-Hardtop-651-of-675-produced_W
0QQitemZ4567376760QQcategoryZ6389QQrdZ1QQcmdZViewItem

Still trying to solve my idol problem with this duel carb setup on my
Lark six.
I have done everything that was recommended to no avail. Last night I
disconnected one carb and started the car and it idoled fine, switched

Trying to get the '63 GT ready for Spokane. Got it up on ramps last
evening, and drained the oil. One of those expandable rubber plugs in
the oil pan. It was getting dark, so I left the drain pan beneath and
went inside.

Anybody ever seen it done?
The rear quarters are the same on all ('57 thru '64) C's and K's, right?
Fins were just bolted on from '57 thru '61?
Dave Miller

on the car from a seller with a -1 Feedback!
http://cgi.ebay.com/ebaymotors/1956-VINTAGE-CHAMPION_W0QQitemZ4567714931QQcatego
ryZ6466QQrdZ1QQcmdZViewItem
Dave Miller

There is a 65 Cruiser for sale on ebay. In the picture of the dash you can
see a brick on the trans hump. I'm just wondering if this is the emergency
brake or is this the spare door key????

Does anyone have any suggestions where I might find wheel cylinders for
a 35 Dictator?  I know I can buy the rubber cups for rebuild but I have
one which has the 1 3/16 inch metal end cup destroyed.  Also looking
for a tail light assemby if anyone should have one for sale.

It looks like I will be driving to the L.A. area in October and was
looking to offset some fuel costs by possibly hauling a vehicle from
east coast to west coast, west coast to east coast or all of the above,
any interest?  I will be hauling with a 18' flatbed (open) trailer

Well I jumped, and will be in Spokane Wed, Thur, and Fri. Hope to see a many
NG as I can.
Ebon...(Almost a last minute thing)

In the process of putting a 700R4 into the Hawk I managed to screw up a
couple of the bolts that connect the flex plate to the crank.  Does anybody
have a set or a couple extras that I could buy.  Thanks, Don

Taking alot of flack on this end. Can't drive have to fly.
Arriving Sunday afternoon. Is there a shuttle from the airport? Or
whos's gonna pick me up?
So you'll still get to see my ugliness there!!!

While talking to a guy on the phone that is interested in the 54 he
mentioned he was in the music business. I mentioned his name to my son
and he's hot to send him a CD of his band. Arlen Roth is the guys name,
Hot Licks his company, never heard of him myself, but that's no

from my e-mail
"Your Wrong ( fins on Gt's)
Hello John
Sorry I cannot figure out how to reply on the google site. Could you

$8K open on a 1965?
http://cgi.ebay.com/ebaymotors/1965-Studebaker-SDN-Mint-condition-All-original_W
0QQitemZ4567157977QQcategoryZ6466QQrdZ1QQcmdZViewItem
Dave Miller

Anyone got a FLAPS part # for a 1959 Delco Distributor vacuum advance
for a 1959 Lark VI?
Thanks
Jim