Can anyone tell me if there are two different oil bath cleaners for
1953 Studeabkers Commander v-8's? I have two. On the bottom of the part
that screws on to the Carb (bottom of the large round part) the surface
is concave (curves up). The other one curves down. The only inner

I am looking for information on a market buggy, and i am wondering if this
is an acceptable media to look for that? I dont want to waste you peoples
time. Thanks in advance.

My wife Jane and I drove to the SDC Northeast Zone Meet in Enfield, CT on
Friday evening in my '48 M5.  It was about 100 miles from our home in
Dartmouth, Mass.  After about 40 miles, a serious engine miss developed.  Of
course, I had decided to take 2-lane back roads through ...

Eight words with two different meanings
1. THINGY (thing-ee) n.
Female... Any part under a car's hood.
Male...... The strap fastener on a woman's bra.

while gutting the interior of my '55 coupe yesterday I noticed... I
don't have armrests in the rear seat!  Is this an artifact of the C3
trim level or did they just get lost while the car was reupholstered?
thanks,

Found this on Ebay the other day.  Got to chatting with the owner about the
factory Packard V8 in the car.  He swears it's a Packard R3 engine, because
someone told him (an SDC member) you could tell by the valve covers.  I've
looked at the engine and ask for the engine serial ...

The T Cab has L78 15 bias ply tires.  Time for some new treads.  I like
the white wall look on the T Cab.  I imagine if I stay with the white
wall tire I would have to use a passenger car tire.  Does anyone know
what size L78 15 is in todays tire sizes?

anyone buy one from SASCO recently?  this is the part that stumped my
alignment guy.  Took a closer look at it myself today; it feels like
there's some kind of hole in the rear of it, but both a 5.5mm and 7/16"
allen wrench are too small to grab in it.  (I can almost feel the 7/16"

I was contacted by an Avanti owner in texas who wants to have his 67
mechanically gone through ( brakes, coolant system, etc.) on the car
after sitting 19 years in storage. He is north of Houston. Please
email any recommendations.

Got back from Vegas last night, net a nice young couple who managed to
leave N.O. on Wed - boy, did they have some stories. They're starting
over in Las Vegas, they'll stay in my place for 2 months until they get
on their feet. Neither has a Studebaker, but he was admiring the ...

http://cgi.ebay.com/ebaymotors/Studebaker-STUDEBAKER-COMMANDER-K-COUPE-VERY-RARE
-1953-STUDEBAKER-COMMANDER-K-COUPE-ANTIQUE_W0QQcmdZViewItemQQcategoryZ6466QQitem
Z4573127764
JP/Maryland
Studebaker On the Net http://stude.com
My Ebay items:http://www.stude.com/EBAY/

I have no attended my first official SDC meet and had a great time, met a
lot of great Studebaker nuts and saw some beautiful cars.  The meet was at
Boomtown in Reno Nevada, hosted by the Sagebrush Chapter.  They were
excellent hosts!  We got rained on a couple times, but as far ...

Dear Red States...
We've decided we're leaving. We intend to form our own country, and
we're taking the other Blue States with us.
In case you aren't aware, that includes Hawaii, Oregon,Washington,

I'm putting an NOS twin-traction DANA 44 in the pikup.  Anyone know what to
use for lubrication?  The shop manual says to use S/P Twin-Traction
Lubricant, but I'm fresh out!
Thanks for any suggestions!!

For months the media has kept saying we had record high oil and gas
prices, and until this past week it simply hasn’t been true. The record
high was set in 1981 at just over $3 a gallon in inflation adjusted
dollars, the only honest way to measure prices over time.