I got some new pics up on webshots. There are some of our cars, plus a
few of the project dump truck work day Saturday.
http://community.webshots.com/user/mbstude101
What does this hubcap fit; is it even Stude?

Someone needs to reproduce these:
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4603175766>
I would pay $99.00 for a pair of reproductions.  I had a blue set in a
1963 Cruiser but they dry rotted into oblivion.

Saw on CNN a few minutes ago that Shelley Winters died..
She was 85..
Man, I remember her in tons of stuff...
Over 130 films according to: http://www.imdb.com/name/nm0001859/

I heard this today....
It's one to remember....
"I can answer the question,
But I can't understand it for you"

Amazing thing is the number of bidders (and who they aren't)
Item number: 4603328287
http://tinyurl.com/ab2ws

WITH...
It was 62 degree's yesterday in Baltimore...
Left there about Pam and headed north.
Gave up just 5 miles south of Harrisburg...traffic was nutz.

OK, I've got all the new clutch parts and the machine shop at the FLAPS
has made the base part for a DD style centering tool so I'm ready to go.
However while the clutch was showing signs of distress (flywheel needed
to be resurfaced - $20 at FLAPS instead of the $70 that the big ...

Does anyone know the "trick" to repairing a Studebaker ignition lock using
Mopar components.  I need s much info as possible, manufacturer/product
number,etc., and any other advise suggestions to complete.  The switch I
want to rebuild, is the same as '56 thru '60 (or later).  Thx, ...

There has been a rumor of a Hawk in a scrap metal place in Yuma for a
time. Today one of the members of the Southern Arizona chapter went
over to look at the car. Here is what he found:
It is a '56 J, VIN #6800211, body #56J-K7 378

Got a chance to play with my '55 today...  my new trunk hinge showed
up, so I installed that, did a rough pass at aligning the trunk lid
(dang, they really DON'T fit well, do they?) - I got it at least so the
gaps are half decent, although it barely misses the quarter on the

John sent me the Mylar he had purchased and mentioned on the NG. I took it
to compare with the mylar on a couple of original Packard Hawks that Bob
Kapteyn has. The stuff John has is a match to the original Packard Hawk
mylar. My best guess is that he has a roll of the ...

Hello There, I'm looking for a vacumn advance for a 1957 Studebaker
Silverhawk with a 289 Stude engine. Anybody know where and how much?
Thanks
Also need Front drivers side window for 1956 Powerhawk. A new friend

On my 18' car hauling flatbed I built a couple years back, The axles and
hubs use a 5.5" 6 bolt wheel, BUT the wheel must have a 3.625" whole in the
center to fit the hub center.
I've always run 15" six bolt wheels from 70's GM trucks on it, but always

On-line registration is now available for the 2006 AOAI meet in Palm
Springs ( April 23 - 29) at http://www.aoai.org

(Posted while setting in a motel in nowhere'ville PA...)
Grrrrr!
While reading my freebie copy of USA today.......
The Chinese car builder Geely is calling their new model a CK....(Of all the