Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Antique and Collectibles / Studebaker / January 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Starter solenoid question11 Jan 2006 03:46 GMT1
Guys, I was having an electrical glitch that turned out to be a wire that
came loose from the starter switch, but before I found that, I replaced
the starter solenoid on my (12v converted) '51 Champion.  Replaced it with
a NAPA ST51, 12v model and after resoldering the loose wire on ...
Stude's In Print (sort of)11 Jan 2006 02:38 GMT2
Interesting article in "Air Classic's" magazine.
Volume 2, #2
Pages 6,7,8
Article is titled "Backyard Bomber"
51 Stude Wiring11 Jan 2006 02:22 GMT10
the old cloth wiring on my 51 Champion between the headlight terminals and
horn relay (The section over the radiator) is going bad and should be
replaced.  Is it possible to just get that part of the wiring harness?  Are
the terminal attachment posts available?  They are all ...
Distributor gasket11 Jan 2006 01:21 GMT11
Well one good thing seems to have come out of my clutch problems.  I was
convinced my oil leak was that piece of cork at the rear of the pan, but
when I got it apart it was apparent that the biggest leak was coming
from on top of the engine... the distributor.  That would also ...
Arnold Altman of Avanti II Era10 Jan 2006 23:07 GMT3
Arnold Altman dies at 88
Businessman's company built Avanti autos after Studebaker quit.
By ERIN MILLER
Tribune Staff Writer
January 2006 TW10 Jan 2006 22:48 GMT8
I still do not have my January 2006 TW.  Anyone else with this problem?
Paid my annual dues November 2, 2005.  Check cleared the bank in Nov.
Thanks,
Jim
Eeeewwww (ot)10 Jan 2006 15:57 GMT7
Saw a serious news article a few weeks back that really caught my
attention....
Since this is cold and flu season, and handshaking is a dirty (germ wise)
practice...
Tubleweeds Chapter has re-built their site.10 Jan 2006 15:51 GMT6
see http;//www.studebakerclub.org, it's still a bit raw, but coming along.
It went live Jan 2nd.
Signature

WTF is Oujdeivß?

anyone know WHY gas jumped almost.30 cents a gallon today?  OT????10 Jan 2006 14:15 GMT38
from $2.18 to $2.45 a gallon citywide.
                     WTF???!!!!!
Chrome Needed for 62 Daytona Convertible10 Jan 2006 12:21 GMT2
I was wondering if any of you guys had any chrome for sale for a 62
Daytona convertible. If so, please email at roxiejollie@bellsouth.net
or call cell 803-215-3412 or home 803-648-4407.
Thanks,
Studebaker dealership, turns into collector's dream home.10 Jan 2006 10:51 GMT2
>From the Milwaukee Journal Sentinal:
http://www.jsonline.com/homes/buy/jan06/383051.asp
I remember helping a friend load his Studebaker pickup, with all the
parts and books, when the place closed in the early '70s.
Studebaker STP F/S10 Jan 2006 06:15 GMT9
   I have 3 full cans of 1962 Studebaker STP, $25 to a NG'ers door, add
a can for $20.
Signature

JP/Maryland

Crank bolts10 Jan 2006 01:51 GMT4
I've put three crank pulleys on the new engine with the proper spacers
and now I need the long crank bolt. It appears somewhere between 2.75
and three inches long is needed. Is there a source for these? Does
anyone have one they would sell? The previous owner machined a hub for
28 Stude rod10 Jan 2006 01:16 GMT7
  Here's the car we spoke about last week on here:
http://cgi.ebay.com/ebaymotors/Studebaker-Studebaker-1928-STUDEBAKER-28-rare-car
-NICE_W0QQcmdZViewItemQQcategoryZ6466QQitemZ4603348146QQrdZ1

Signature

JP/Maryland

If it wasn't for bad luck PT II (HELP - Need ideas!)10 Jan 2006 01:02 GMT15
For those who came it late...
>Last weekend my truck started acting up, on acceleration it almost
felt like the truck was being propelled by a giant cog wheel.
>In gear it will do it in either direction.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.