<http://cgi.ebay.com/ebaymotors/STUDEBAKER-LARK-DAYTONA-CONVERT-FOR-ST-ROD_W0QQit
emZ460302793>

Right side head has 6-24-S cast in it under the valve cover,Left head
has
6-25-S on it. Both have the same part number cast in them above the
center exhaust ports .

Does anyone know of a source, or have a extra long front crank bolt?
Maybe between 2.75 and 3 inches long.
Thanks
KM

http://cgi.ebay.com/ebaymotors/Studebaker-PRESSIDENT-4-DOOR-SEDAN-1958-STUDEBAKE
R-MILD-CUSTOM-FRAME-UP-RESTO-BEAUTY-COOL_W0QQcmdZViewItemQQcategoryZ6466QQitemZ4
602927246
   Wrong on a few levels. <g>

Slowly whittling away at the Hawk - is the underside of the
hood supposed to be black or body colour?
Thanks!
Judy

Drove the Stude to our chapter meeting today...
It was below freezing when I pulled the yellow pos out of the shop.
Warmed up to a balmy 33 degrees when the wife and I left for the 'brunch'
meeting...

I replaced the tach sender on the GT I'm working on and the old tach
started working...for a little while...now it goes up on decelleration
and sometimes is dead.  I checked the grounds, etc. and just figured
that the old head was done for after not working for twenty five years.

john,I can't seem to post. for some reason. could you post this. saw a
bullit nose in a pacer ad on ebay the car will be for sale soon per an
email I got from the seller. see this link and its in YORK!
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ru=http%3A%2F%2Fsearch ...

I asked this question on the SDC website but didn't find the answer I was looking for. I have a set of V-8 pistons which have the number 1558178 cast inside. I can't find this number in the parts books so I assume it's a casting number. Can anyone tell me what size, Std., .010,  ...

This looks like a deal- no reserve either.
http://cgi.ebay.com/ebaymotors/1982-Studebaker-Avanti-II-GARAGE-KEPT-MUST-SELL_W
0QQitemZ4602962929QQcategoryZ6466QQrdZ1QQcmdZViewItem
Paul Johnson

Sent: December 8, 2005 4:07:58 PM
     Jim Smith started the day early having set his alarm clock (MADE IN
JAPAN) for 6am. While his coffeepot (MADE IN CHINA) was perking, he shaved
with his electric razor (MADE IN HONG KONG). He put on a dress shirt (MADE

After the Lark Daytona Convertible that sold (BIN) on eBay other day this President doesn't look too bad either for the BIN price of $4600, and it's California car to boot.
http://cgi.ebay ...

Need a Lark radiator with the trans cooler in the bottom.  The powershift
and heavy duty use such as taxis used them.  Anyone out there have a good
one for sale?
Ron

My wife and I was sitting watching television last night.
I thought maybe that this would be a good time to tell her about my living
will.
So I said "Just so you know, I never want to live in a vegetative state,

  Mike sent me a sample of the repro stuff and it's a lot different
then what I have here, My has squares about twice the sie of the smaller
circles in the repro stuff.  Mine might be for the door panels of 56
Golden Hawks unless the PH had the bigger squares.