If the American auto companies would study casino marketing, they'd
be market leaders. The casino guys learn what their customers want by
careful tracking, then cater to it. It should be obvious that most
gamblers have ego's and they have a.s kissing down to a science.

Does anyone have a 3.07 TT less axles, backing plates and drums for
sale?

Hello:  Does anyone know anything about this bullet nose convertible
listed on e-bay?
Regards,Sheldon

found a 48-49 star light for some parts some one tell how to tell what year
it was  no grill, hood or deck lid passenger door pretty good tail lights
lay flat they are in good shape one cracked lense drivers door bottom pin
holes back fenders need a little work but not all dented ...

http://www.photoshow.net/watch/jV9zD3Ig
I hope this works

the fender area under the fins where the three scalops atach, is this
drilled to let the pins go in or is there a pice cut out of the 1/4 thanks h
downs

I did not find the PhotoShow process to be as easy as some did, but did
manage to get a "show" up and running. (I'm a real computer dummy.)
Studegary gets first shot at this car. I have another web site up with more
details, but nobody else sees it until Gary sees it. That site will ...

Keystone SDC had its planning meeting today and 13 Studebakers showed up.
Pics at
http://photoshow.comcast.net/watch/yc4BB5if

Somebody asked about Stude stainless.  Without actually checking the
prints one can't be sure; but, as someone noted, the standard stainless
for many applications was 301.  This was indeed used for wheel covers,
as well as aircraft parts, architectural items, roof gutters, and in

When I bought my '64 Avanti R-2 I didn't like it sitting so low in the
front.  So, I replaced the springs with a set of Studebaker Avanti Heavy
Duty springs.  Height gained- zero.  The springs I took out don't have
Studebaker numbers stamped on them, but have "US 480" stamped on ...

Ford, GM fuel 7.5 percent rise in January sales
Dale Jewett
Automotive News / February 1, 2006 - 2:06 pm
     DETROIT -- Fueled by unexpected sales gains at Ford Motor Co. and

I just bought a Studebaker V8 engine that was just pulled out of a 53 2
door and it has this number on the engine V252357. It has a 3 speed
tranny with an overdrive as well. I intend to sell them both and am not
sure which engine I have. Thanks for your help.

Any suggestions from someone who has done this, to an actual tach (company
and part # etc) that 'fits, and looks close enough' to replace the
(non-functioning, not wanted) clock? I'm guessing likely a SW of some
sort...

Just saw the movie "Worlds Fastest Indian",there's a scene at
Bonniville Salt falts and there in the back ground is 53 stude salt
racer..good movie for motor heads

Well, got the carb running as best I can without the check ball - just got
to get up to Studebaker John's for the right parts - and drove her down to
the chevron to fill up.  Drove back home, getting quite a few good looks and
a "NICE" shouted by a guy at the post office, blowing ...