Had a great visit with Bondo Billy and his wife tonight.
We went out to an old restored woof ceiling gas station restaurant.
Good eats. Good talk.
Thanks!

In the corner of a friend's tranny shop is a Detroit Gear tranny with
an emergency brake band on it.  He says it came out of a Stude truck
and he rebuilt it long ago but the owner never came back.  Did Stude
trucks ever use the DG trans?  He is getting ready to retire and has

Yesterday, at lunch me, my grandpa, and cousin Josh, (the 5 year old)
took my Daytona to Burger King, then to every parts store in town
trying to find a set of shock absorbers and a cherry bomb glass pack
for the exhaust system. Didn't find either... The Daytona did ok, but

For general information on a topic that was and is discussed frequently.
Had a vehicle in the shop that had 79k miles on it since rebuild.  Stuck to
the gills.  Opened the engine and found about 3 inches of hard gunk had
accumulated in valve covers, intake valley, oil pan.  Oil ...

Off the hurt 289 in a 63 GT Hawk.
let me know if you need it,Thanks.
E mail me direct.

The horn button listed for a 55 is 800760, gold with a clear top with and an
S inside on sort of a grey background.  This is the same button shown on
most Speedsters.  The button that was on my Speedster had a tristar on
concentric circles.  Where did this button come from?

http://www.guardian.co.uk/usa/story/0,12271,1697518,00.html?gusrc=rss
Mark
65 Cruiser
http://home.alltel.net/anderm

My e-bay account got hijacked this morning and all of a sudden I was
selling 6 lots of 50 Nokia cell phones from Great Britian.  Fortunately
I was able to get on with their Customer Support and get everything
straightened out.  What a pain in the a.s...

I want to buy new wheels for my Speedster.  Should I buy the Bob Holm
wheels, Ford Ranger wheels or something else?
Thanks
Bill

Anyone have a new/good used (electric) wiper switch for an early C-Cab?
Thanks,
Ray

Does anyone have a link to original interior pictures of 1957 Golden
Hawks? Especially seats, door panels and headliner.
    Thanks,
    Chuck

I have a 62 GT made  (assembled) in Canada. Does anyone know how many were
produced?
There appear to be 2 VIN #'s , one on the A pillar dr. side (62VC 2432);
the other on the firewall (62v-K6-4666) . Why different #'s?-one the VIN &

Hey Everybody,
I'm curious as to what series of stainless was used for the trim on
Studebakers, specifically the pre-war models.  I assume it is in the
300 series, perhaps 316, but I don't really have a clue.

Anyone install the new Foxfire v 1.5.0.1 yet? Any issues?
Chip

Hot Rod Magazine
March 2006
Page 24
1954 Conestoga Wagon