Antique and Collectibles

Thread preview

Thread	Last Post	Replies

Need copy of Parts & Accessories Bulletin #29, 1/4/1946	22 Feb 2006 21:21 GMT	3
Anybody got a copy of Parts and Accessories Bulletin #29 from January 4, 1946? I'd like to buy one or a get good copy of one. A 300 dpi scan would do nicely, thank you. I particularly want the pages with the information on the wood letters used above Stude parts counters (see
What does this fit? ~ 273487 trunk hinge?	22 Feb 2006 19:26 GMT	1
What does a 273487 trunk lid hinge fit? I assume this is the correct number since it is written on the item rather than tagged. Tnx - Ted.
New pics/dump truck update	22 Feb 2006 19:13 GMT	5
Page 3 and 4; some of our stuff: http://community.webshots.com/album/543822171LIghnl Truck pics from work day Saturday: http://community.webshots.com/album/547800639fHwszj
Tuesday Follies	22 Feb 2006 10:55 GMT	6
Had to work in Tampa this morning. Left extra early and delivered a Ray Ficthorn LR C/K fender to Rick Courtier, along with some other stuff.. (Newsgroup Express rides again!)
Here's one for a California Stude nut	22 Feb 2006 06:37 GMT	5
http://cgi.ebay.com/ebaymotors/63-Stu-What-the-heck-does-that-mean-Studebaker_W0 QQcmdZViewItemQQcategoryZ50452QQitemZ8039190175QQrdZ1
Can somebody look in their roster for me	22 Feb 2006 05:15 GMT	1
I need to get the phone number of SDC'er Robert "Bob" Dellinger, from Illonois. Can anyone look it up and give me an email? Thanks Kent Fedor
Where was Moses when the lights went out? OT	22 Feb 2006 05:08 GMT	4
Answer: sitting in the dark, just like me. Went down to camp about 6:30 this evening for supper. When I got back, the shacks were all dark, and the drilling rig was off bottom, just circulating, without sufficient electric power to drill normally.
Steering wheel	22 Feb 2006 01:52 GMT	16
Anyone got a nice looking red/white steering wheel for a 63 Lark that they would be willing to part with? I haven't seen any on Ebay lately... Matthew (I'm a registered Ebay bidder, finally!) Burnette
fast Studebaker	21 Feb 2006 23:54 GMT	7
With a blown hemi, it would come close to Ted's Stude powered Chicken Hawks times in the quarter. <g> http://cgi.ebay.com/ebaymotors/AWESOME-OUTLAW-10-5-1954-STUDEBAKER_W0QQcmdZViewI temQQcategoryZ98062QQitemZ4615444679QQrdZ1
What is it?	21 Feb 2006 19:06 GMT	15
Try to restore this car to stock... http://www.carsinbarns.com/Classics/Pg10Clscs.htm
I've Joined the Hole in the Hood Gang!	21 Feb 2006 19:03 GMT	12
Can anybody tell me what these little holes in my Transtar hood might be for? I wouldn't think they belong there, but there is a matched set on the other side. I've finally gotten everything caught up around here, and am starting to look at Goliath and 'Sheba, to decide what
Wish I was this guy	21 Feb 2006 18:15 GMT	10
http://cgi.ebay.com/OLD-Studebaker-Erskine-Porcelain-Graphic-Sign_W0QQitemZ72183 15264QQcategoryZ10780QQrdZ1QQcmdZViewItem Check out his other items. Mathew
SASCO orders	21 Feb 2006 16:57 GMT	8
Dennis tells me he has a lot of room in his trailer for preordered parts for York. If you want to save on shipping, get your order in now.That probably goes for SI and the other vendors too.
I need help ID'ing a motor	21 Feb 2006 15:02 GMT	5
I recently got a straight six engine from a 1941 pontiac.After some research, I think it may be a studebaker . It has a carter BBR carb and an autolite distributor 1120566. can anyone help? or send me to pics or a site that has more info? I can post pics or the engine number.
Well you guys did it to me again (OT)	21 Feb 2006 06:54 GMT	22
You done talked me out of going out and drinking,and it was only you guys that did it,cause I sure wouldn't even tell Diane, Can't tell you what a fine bunch of freinds you all are,and then theres that offer Gordie Richmond made,truly humbling to be involved with such first