http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8054925280
 Todd

Automatic tranny seems to go into gear ok when cold,and shifts ok
cold.when warmed up it hesitates going into gear,but still seems to
shift ok there after.what do'es this tranny need?

My local Goodyear dealer and front end alignment person is going to
replace the upper and lower bushings in the Control Arm Assemblies on
my 57 Silverhawk. Will he need the J-5472 Tool Set as noted in the
manual or will he have enough tools of his own to do the job? They have

Does anyone have a '57 and a '58 Studebaker shop manual supplement
they'd be willing to part with, original or a very good copy preferred.
 I have a '56 manual but not the sups.  Thx

Action is a little slow except at shift change. I'm told there are two
eggs in the nest.
http://forum.hancockhouse.com/staticpages/index.php/20060323091954727

Nate,
Is there a special technique to push/pull the pins in a connector to
accommodate a replacement harness for a vintage 70's Dodge van?
JT

Out of curiousity I e-mailed the winner of the '34 Dictator
congratulating him on winning the fine car and to ask about what his
intenions were with the car. I recieved no reply. After looking over
his past auctions two things seem apparent, he is made of money, and

Bring a spring for the hood saftey latch on my 48 to the Tulsa meet.

Please correct me if I am wrong! Arent windshields interchangeable
between 2 door and 4 door bodys in the 64 to 66 year
spread?????THANKS!!!!!! RICH

Somebody hit the BIN button.
http://cgi.ebay.com/ebaymotors/1955-studebaker-commander_W0QQitemZ4628808481QQca
tegoryZ6466QQrdZ1QQcmdZViewItem
It don't get much cheaper then this.
Malcom

Where can I order one and how much?

In this auction,
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4628539892&sspagename=ADME:L:
RTQ:US:1
I wrote the guy about the brake master cylinder, pointing out that it did
not look like the MC I have on my factory disk brake '64 Cruiser.  He

Any one have a good T-96 W/O overdrive, whole or parts? I need the main
input and output shafts to be in good usable condition. Will consider any
area, any amount of missing parts, as long as it has the two shafts and will
fit a 59 Lark six.

In 1971, between Christmas and News Years, we were traveling in our
110,000-mile '64 Wagonaire from Western Kansas to Boston .  A little east of
St. Louis the alternator quit.  I drove on until dusk on the battery then
stopped in Pocahontas, IL and checked in to a motel.  In the ...

61 truck,63 or 64 dash, 65 or 6 front clip? ...
any body seen this before? Rich
http://cgi.ebay.com/ebaymotors/1961-Studebaker-Daytona-Pickup_W0QQitemZ462825188
6QQcategoryZ6466QQrdZ1QQcmdZViewItem