I need to know the best way to disconnect the hoses so I can remove the
compressor and condensor coils.  The hoses run thru the right fender and I
want to take the fender off for restoration.  The car has been sitting for
about 20 years without being run and I don't know if the ...

Need a pair of 1963 Lark Convertible Weights that go behind the front
bumper

Here's one of those really cool 36 Stude guage clusters.
http://cgi.ebay.com/ebaymotors/1936-Studebaker-Dashboard-Instrument-Cluster_W0QQ
itemZ4633813286QQcategoryZ42606QQrdZ1QQcmdZViewItem
Matthew

I think there is some confusion here SDC today is http://www.sdc.com,
swingers date club which is run by SDC Media Inc. SDC Media owns both a
federal trademark registration for its SDC mark, U.S. Registration No.
2,818,125, and a pending U.S. trademark application for the same term.

   Gas went up here on Tuesday from 98.9 / L to $1.10.9 / L then back down
1 cent on Wednesday.  That's taking it to about $4.20 per US Gallon...
($5.04 Imperial Gallon)  And you complain about close to $3.00 / gallon.....
OUCH!

Golden Lark for sale:
http://adcache.collectorcartraderonline.com/10/1/0/83300810.htm

Or anyone's hawk for that matter. yet another set of nice Speedster
wire wheel covers.
http://cgi.ebay.com/ebaymotors/Original-wire-wheels-covers-for-a-Studebaker-Spee
dster_W0QQcmdZViewItemQQcategoryZ66483QQitemZ8058419468QQrdZ1
Matthew

   Door to door breast exams, what a concept. <g>
http://news.yahoo.com/s/nm/20060420/od_nm/breasts_dc;_ylt=AkuscuC_Sj3dsz42mG7SW1
Os0NUE;_ylu=X3oDMTA3ODdxdHBhBHNlYwM5NjQ-

I don't know why, but I ended up looking at some racing wheels out of
idle curiosity, the steel wheels sold by Bart, Bassett, et. al...  they
look like they're pretty light and cheap, they're available in 15x7"
with various offsets, and I think silver powdercoat would look good ...

  Interesting thing about fiberglass bodied cars do to electrolytic
effect all the rust takes place in what ever metal is there.
Examples:
   Went to wash the 10 years of dirt off the cheap Avanti and tried to

   Well, it was bid to $16,400, but did not make reserve.
http://cgi.ebay.com/ebaymotors/Studebaker-studebaker-commander-1958-studebaker-c
ommander-2dr-ht-V8_W0QQcmdZViewItemQQcategoryZ6466QQitemZ4631224563QQrdZ1

Working on building an Avanti chassis out of stainless steel. In need
of a Avanti body in good structural condition. Will post photos for
those interested in it's construction. email:grobb284@aol.com

I am willing to bring this stuff to south bend swap, if someone is
interested.  Otherwise these are not worth hauling along.
Front inner fenders 1947-1949 champion, solid, off california car. $20
each

PM and other old time racers will be honored at the California Racers
Reunion.
Many famous and semi-famous people will be there.
$30 each

There is an interesting article in the June Hot Rod issue.  It mentions
a high number of cam shaft failures that have been noted on older
vehicles using flat surfaced lifters.  One of the main reasons listed
is that the new oils are being formulated to meet stricter emission