I got the following email yesterday. For those in central North
Carolina you might be able to help this guy out.  I added the email
address that will take you to the reality company that is dealing in
this property. If you click for more info. you will get a four page

http://vanderbrinkauctions.com/items/details.asp?ID=175&ItemType=AUCTION
Ken Voight Collection
     DAKOTA STUDEBAKER-KEN VOIGT COLLECTION-ARMOUR, SD APPROX. 200
CARS-PARTS!:

left front fender spear for 59-61 Hawk needed!
--
Barry'd in Studes
58 Packard Hawk

 If someone were to start a small inventory for a rehydration station
at some swap meet somewhere,what would be the usual inventory be?
MY eyes arent BROWN

Bought a new hood insulator for the Lark. One side is shiny, and the
other side is rough, bare insulation.  Which side gets glued to the
underside of the hood? The shiny side has white lettering on it.  Not
sure if the shiny side is showing if I would want the lettering to show

Hyundai may also hit the big scrap heap in the sky!
http://www.leftlanenews.com/2006/04/18/hyundai-at-risk-of-collapse/

Nate -
I dismantled and cleaned both steering columns (PS type).  The
Automatic Drive unit you sent me was good inside; I'll use it but with
my jacket - less rust.

I have been playing around with my inkjets making logos and oher stuff
so I thought that I might do my mailbox.  I printed out some Authorized
Service Medalions and went to the model shop and got me some fireproof
dope and dope the logos in place.  Three coats later I installed my

After a year or so of looking for my R1 oil pan, breather tube and windage
tray. I have found enough parts to put the engine back together in the
Avanti. But I am still missing the cap bolts. After searching through used
Studebaker main bolt caps I found one, and one only.

 Jerry Kaiser and me are trying to help a widow sell a Studebaker
collection and I would like a proof read of our ebay listing. Grammer,
spelling errors, helpful rewrite advice, whatever. E-mail comments are
fine too. This is a not for profit deal, but I don't want to screw up ...

http://www.incident.net/works/miseanu/nues.html
Just point your mouse at them(G)

I remember back in the late 70's/early 80's there being talk about
ethanol being harmful to seals, carbs etc...Any concerns warranted ?  I
just filled up my truck with 10% ethanol.  It's all over New England....

OT but interesring and not political.
The name of the magazine is Make.  They are sponsoring a DIY fair this
week end April 22 & 23 at the San Mateo, Ca fair grounds. Very
inovative stuff.

Are there any photos or info on Studebaker prototypes and concept cars
posted on the web anywhere?
DGH

Anyone have a decent used Avanti radiator ? (AT version) Looks like my
cheap Avanti is going to at least run. I pulled the engine, steam
cleaned it and the under hood, and spun the engine over on the starter.
Compression is a little low (160-170 pounds) but that may improve with