Not a Stude, but a different combinations of interests. Wine and Hot
Rods!
http://www.brianbensoncellars.com/index.php
Joe Roberts

http://cgi.ebay.com/ebaymotors/1949-Studebaker-Flat-Deck-Stake-Truck-Rare_W0QQit
emZ4645671085QQihZ002QQcategoryZ6466QQrdZ1QQcmdZViewItem
That really looked like a deal! I'll take $15,000 for mine. And who
would spend $40,000 to restore a 49 1.5 ton truck!? And then only want
about ...

Hello;  I noticed the trunkl lid on my 60 lark sits high when closed.
The rubber seal is mounted on the underside of the trunk lid. All of my
cars have the gasket mounted in the channel on the trunk body. Is this
under the deck lid mounting correct for the lark,or did someoe goof.

I know something has to be done, but how extensive and who should do
it?
Thanks
Don Smith

Added this truck to the collection,,,,,,,BUY IT NOW
<http://cgi.ebay.com/MARX-50s-STUDEBAKER-LUMAR-VAN-LINES-LITHO-19-LWOW_W0QQitemZ7
040303786>

I plan to replace the 305 SBC in my 1990 Avanti.  I'm looking to
educate myself on 3 issues:
1.  What intake manifold would work best on a 383 while still utilizing
the TBI (throttle body injection)?  The block (#3970010) and heads

For any who might have missed the weekend's frolic at Lisle, IL, I have put
some photos from the Zone Meet up on www.packardhawk.com if you prefer to go
directly to the photo page here is the link.
http://64.81.137.211/phawk-gallery/main.php?g2_view=core.ShowItem&g2_itemId=237

I am looking for a Factory R2 4Speed / Automatic  Hawk or Lark. I have been
in contact with a Florida Car Owner with a R1/R3 Hawk 4speed clone. His car
is very very nice. Any comments from this Community would be fully
appreciated. I am not a collector but an enthusiast who has been ...

Does anyone know if a wire harness diagram is available in color for a 1964
Cruiser?? Any help or comments appreciated.
Hal W.

What's Her Face is out of town for the next week, looking after
grandchlluns.
This is my first week home alone for as long as I can remember.
I have raised all of the toilet seats, and intend to leave them in that

Went to FLAPS today. Got me a remanfactured power rack & pinion. It was
listed as being for a Skyhawk. But it bolted right on Leo. Pix later.

Where can I get flanged axles for a 63 Avanti?
Allen

Hello:  I  bought the red convertible that was on e-bay mid may. I used
a transportation broker to hire a trucking firm to transport the car
enclosed from Ca to Fl. The price was at least  $500  cheaper  then the
major transporters. The  boys arrived 10.p.m. at a local Walmart.  I

Bob,
Do you have any links regarding the issue of modern motor oils and the
failure rate of flat lifters etc.?
Thanx,

For those few of you who wondered where the TurboStude site went.....
It is now back with its own URL:
http://turbostude.com
Thanks to Bob Waitz for providing my site shelter for the last year.