Here ya' go, MoPar fans. This is probably less than an hour's drive
from my home, if anyone wants it checked out <GG>: Take a CLOSE look at
these detail photos before you next complain about Studebaker Swiss
Cheese:

I have a 289 block, non full flow, and two mostly bare heads for sale. I've
been told some of  the main caps  have been switched so the block would need
to be line bored.
What are they worth individually or together?

Does any know of a good source for a replacement York DA209 A/C
compressor as used on a '64 Cruiser?
Jim Bradley
'64 Cruiser

We left in the Ram 2500 a little after 6 am and bounced to Cleveland pulling
the bouncing, banging empty car trailer (Pennsylvania roads leave a LOT to
be desired).  Got to the seller's house just about noon  Turned out he was a
local celebrity- the ABC Television morning news ...

   It's for sale for less, but needs some work. <g>
http://cgi.ebay.com/ebaymotors/_W0QQcmdZViewItemQQcategoryZ6466QQihZ002QQitemZ46
45671085QQrdZ1

I am in the process of parting out (dismantling) a 1962 GT.  I would
like to know what years and body styles will the hood interchange with
and also the years that the trunk would interchange.

is anybody close enough to go see this car?
http://cgi.ebay.com/ebaymotors/1959-STUDEBAKER-LARK-II-49K-ORIGNAL-CAR-IS-ALL-OR
IGNAL_W0QQitemZ4645479287QQcategoryZ6466QQrdZ1QQcmdZViewItem
it is clear on the other side of the country from me. the feed back is
not so good so I really ...

Someone comes up with something like this:
http://cgi.ebay.com/Wrecked-Project-Convertible-Studebaker-Starliner-WOW-NR_W0QQ
itemZ7035316609QQihZ014QQcategoryZ2509QQrdZ1QQcmdZViewItem
Matthew

  Anyone know the guy ? Must not have had seat belts in the car.
http://www.ohio.com/mld/ohio/news/14633189.htm?source=rss&channel=ohio_news

My home state is the champ again!
JT
http://www.cnn.com/2006/AUTOS/05/26/dumb_driver_states/index.html?section=cnn_to
pstories

I just had to do a brake job on my 67 Avanti.   It is my only Stude that I
bought ready to drive and play.   I have had it around 10 years.  One of the
rear cylinders was leaking.   It had the regular DOT 3 fluid in it.   I
decided this was a good time to install silicone.   In ...

is anybody interested in an edmunds aluminum head for a commander
engine. a guy has one that has been gone over -
repaired,repolished,etc. he wants to sell it. it is tom langdon of "the
stovebolt engine company". he was calling me about my purchase of a

It's so ugly, I love it.......
http://tinyurl.com/lgr4a