Cleaning up the engine compartment and decided to relocate the battery.  I
intend on using a dry cell and 00 gauge to run to the front.  I plan on
running a #8 tap to the dashboard.  I had considered a drop down box for the
battery but that's not feasible.  I even considered ...

Drove my '50 2R5 the three miles into town today; went to the grocery
store. Unfortunately, I had a little problem.
When trying to back out of the parking stall, I only moved about 5 feet
before I killed it. I realized quickly that the brakes were locked up.

I also found this, when looking for Wide whites.
Well it looks interesting anyway.
Malcom

For the most part my luck was not the best. . . besides screwing up the Gas
Tank and needing a new one for the Sky Hawk. Had prepped the air cleaner,
valve covers, oil pan for paint but the air cleaner was a little rusty so I
used por-15 on it and sanding the primer the por-15 ...

Just look at the additional pics before it gets pulled.
http://cgi.ebay.com/1957-chevrolet-belair-jukebox-plays-45s-couch-built-in_W0QQi
temZ120000785513QQihZ002QQcategoryZ13721QQrdZ1QQcmdZViewItem
Malcom

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=2448
Would this thing do any better than my shop vac?  I'm getting all kinds of
dust blowing out through the exhaust on it... vacuum is no longer gray, it's
a reddish-brown as are the newly painted walls surrounding ...

OK... after ordering 2 of the Master Cylinders noted as "bolt on... need
nothing...work great!"... on Bob Johnstone's Avanti and Studebaker
interchange list...
Does anyone have a VALID part number for installing a Dual-circuit

The fan on my 59 Lark 6 is a fair way, about 2 1/2" from the radiator. This
seems to be a long way considering the other vehicles I have worked on over
the years. Pulling the radiator on some cars I have owned took great care
not to scrape the fins of the radiator with the blades ...

I need the rubber piece that holds the bottom of the door glass into its
metal channel for my '55 C-body, at York I asked Bill Fennessey about
this and he said it wasn't a special molded part, well guess what, it
*is* a special molded part, and SASCO doesn't have any, or at least ...

I pulled carpet from the front to check out the condition of the floor
boards on my Daytona convertible. The carpet wasn't worn, just faded.
I had it lying on my basement floor and remembered buying a can of
spray dye a few months back. (Plasti-kote fabric color 510 Ebony).  I

Has any one used these on their car?    It looks like it would be great
on a Hawk.  It should fit right  on to the Turner Brake dual MC bracket
I have installed.
http://www.wilwood.com/Products/006-MasterCylinders/008-CRTMC/index.asp

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270000681938
"GRAND TERISTO STUDABACKER 1963
MEXICAN CLASSIC.  FROM FACTORY CHEVY COMPONENTS.  350 CH., 300 HP.
TOUBO CHEVY 350 TRANSMISSION.  2 DOOR HARD TOP.  DRIVE AWAY AND HAVE A

Serious inquiry....
I am looking for two people who want to each buy a pair of steel C/K rear
fender skirts.
Any help in the search would be appreciated.

Is replacement foam available for 1963 Avanti front seats?
Allen

   The guy paid $26,500 for this 55 sedan at Barrett Jackson, now on ebay.
Barrett J. link
http://www.barrett-jackson.com/auctionresults/common/cardetail.asp?id=183523
ebay