http://www.opacity.us/site55_staten_island_boat_graveyard.htm#gallery87
Studebaker George

Does anyone have cross reference info for the U joints so that I can
pick up a set at my FLAPS before dropping the shaft.
Thanks,
        Joel

well i am starting to look for seats for my 53 champion prostreet
project.it has a totally bare interior, Has anyone replaced there stock
with late model seats? i was hoping for front and rear to match. i am sure
some one has done this.

I have factory Avanti brakes for sale that I had rebuilt for my R3.  I
am doing Brembo's all the way around so have front calipers with
brackets and rotors for sale.  Also have the complete rear drums if
anyone is interested.

Does anyone know what tire brands are available in this size ?? Also anyone
have the wheel paint code for 62-64 Larks (off white) or an equivalent??
Your help is appreciated.
Hal W

Had to order some stuff from Speedway, and I needed a carb spacer, so I
looked through their online catalog and ordered a 1/2" phenolic spacer
for a Holley 390CFM (I think?  the small one) 4-barrel, thinking that
that way I could open up the holes in it only as large as the bores ...

I have a GT Hawk being delivered tomorrow that is supposed to have been
"finished".  Driver tells me that exterior parts are laying in the interior
and that the gentleman who worked on it, drove it on the trailer and then
removed the battery.  So much for my sending parts and ...

This is quadruple witching week (someday I'll fill in all the blanks)....
I am having a new roof put on.
They got here today.
They are busting their balls to get it done before any seasonal downpours

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270005914495&sspag
ename=ADME%3AL%3ADS%3AMT%3A8

Starting on a new project and I decided to check my sources. . .newsgroup.
First of all I have the dryer, hoses, compressor bracket for the compressor
built (thanks, Jeff) but the evaporator that is a NOS GT Hawk one is just
too big for the inside of the Truck and still have room ...

Does anyone know if a later year commander 6 cylinder motor would be a
bolt in exchange for the 42 commander 6 cylinder.
                                                   Regards,Sheldon

I got everything apart and a new seal intalled without any of the factory
tools mentioned in the shop manual.  But not sure about installing the
pinion flange without the factory pusher tool.  Can I do it without the tool
and does anyone have any tips on how to it without hurting ...

   Got a call on N8's Daytona that I have on ebay wanting to know how
much to end the auction early. I told him I wanted to let the auction
run when he explained he wanted it for the "body" and offered 12K for
the car. To ease the possible pain in seeing the car gutted I told ...

Saturday I took my beater 51 Fiat to the 11th annual Microcar and Minicar Classic at the Lars Anderson Museum in Newton, Mass.  What a hoot!  The names included Subaru, Simca, Trabant, Renault, Citroen, Austin, Isetta, Messerschmitt, Fiat, Smart Car, NSUs, BMWs, DKW, Cooper and ...

Still looking for a body tag stamped 7E 7-112 for my brother.  Any help is
appreciated!