Take a look and tell me what you think:
http://cgi.ebay.com/ebaymotors/1956-56-packard-4-door-very-complete_W0QQitemZ200
009696300QQihZ010QQcategoryZ39405QQrdZ1QQcmdZViewItem
I wrote asking a question if he had two cars and he wrote back they
were one and the same car!

Last night I listed my 56 Golden Hawk OD trans change over on ebay. It
includes a T85 OD trans, shifter levers, bellhousing, flywheel, clutch, etc.
First thing this morning I get a notice that I have a BIN sale, and I am
happy for about 30 seconds until I see that the buyer has zero ...

Still in the mock up stages. Yes, the engine will be Studebaker, a
R1/Powershift.
http://community.webshots.com/myphotos?action=viewAllPhotos&albumID=552398885
Matthew

Finally got the R2 Lark enging detail completed.  It is as close to
factory as possible:
http://community.webshots.com/album/545369323yvBWRt

When I tore my Daytona convertible down for a valve job I found that the
distributor is electronic.  It is a Prestolite so I guess it's a Crane
ignition set.  Are they like some Pertronix where you have to turn on the
ignition for a few seconds before you hit the starter?  It ...

that the Atlantic Zone Meet opens in Martinsburg, Wild and Wonderful West
Virginia.  Tonight, after the opening bull sessions, is the barbeque- 5 to
9.  Tomorrow the big show.
Paul Johnson

I bought a repop hood insulator to put in my '64 Daytona convert- it had no
pad at all.  What do you use to glue it in place?  It seems like I remember
getting a tube of weatherstrip adhesive with the last one I bought, but I
didn't install it so I don't know how that works.

I have a few questions about a Zip Van, that I believe is a '64. It
belongs to Studebaker George, who uses it to house car parts. The
Serail # is E6-FC-3482. So, what can you tell me about it?
Also, what kindof trans do they have? Thie is the one that was in the

I see the Avantis are now showing up on ebay big time after the two
estate Avantis did so well. I predict the market will soften yet again
with too many cars listed at once. (six on ebay now)  Look for the dogs
to come out with 10K starting bids too. <g>

Hi everyone. I recently purchased a 1950 Studebaker p/u, half ton. I
was wondering if anyone knows of a disc brake conversion for this
particular truck. I would like to run the straight axle, but will clip
it with a Camaro front subframe if necessary. Also, I will be going to

Great description too<g>!
http://cgi.ebay.com/ebaymotors/Studebaker-Total-Ground-up-RestoRod_W0QQcmdZViewI
temQQcategoryZ6466QQihZ008QQitemZ180009334923QQrdZ1
Mark
65 Cruiser

I really like the comment "nice paint".  At least he does admit the
hood needs to be "reshaped"
http://cgi.ebay.com/ebaymotors/Studebaker-Hawk-Rebuilt-289-studebaker-motor-Dail
y-driver-DrivesGreat_W0QQcmdZViewItemQQcategoryZ6466QQihZ012QQitemZ220008082645Q
QrdZ1
Mark

Going to be shut down for a while.
Sold the house and am relocating.
During the move special machining will be delayed until the new shop is set
up.

hey all-
It's that time of year again......
the 19th of July, is Lee DeLaBarre's birthday and I wanted to post it
here so he gets lotsa

Rare Scotsman truck with deluxe door trim

Wonder if the deluxe trim was added by a subsequent owner??