I'm cutting up a rusty Avanti frame and I'd like to know if anyone would
like the X before I make it scrap metal.  I'll cut it out real nice and its
free if someone is interested in it.  Located western PA.

This 47 is almost worth it for the parts.
http://cgi.ebay.com/ebaymotors/_W0QQcmdZViewItemQQcategoryZ6466QQihZ001QQitemZ11
0017537484

Getting ready to install the 289 and found a DG-250M on the shelf.
That's the best of the breed, used on the President and Speedster. First
gear start and convertor lockup. I may even add dual exhaust, not sure yet.

http://cgi.ebay.com/ebaymotors/1964-Studebaker-Avanti-R1-engine-Auto-Tranny_W0QQ
itemZ280014943972QQihZ018QQcategoryZ6466QQrdZ1QQcmdZViewItem
Guy says hog troughs are good...

PBS just broadcast Gullwing At Twilight about a group of guys racing a
Mercedes 300SL at Bonneville.  The hook is they got a 87 year old man
to drive it.  He's a former WWII Pilot credited with shooting down an
Me-262 and he was a driver for the Mercedes team driving the gullwing

http://cgi.ebay.com/ebaymotors/1950s-Studebaker-Mini-School-Bus-Very-Rare_W0QQit
emZ170013836254QQihZ007QQcategoryZ6466QQrdZ1QQcmdZViewItem
There's one of these that shows up at the Tri-State Meet every year.  They
took the body and it sits on a stock Dodge Dually frame.
Lee

The mechanic doing the safety would not pass the Hawk. Needs upper and Lower
control arm bushings. There is quite a bit of play in the front wheels. He is
recommending the entire front end. Front springs are weak also, the lower
control arm is parallel to the road surface and the ...

http://www.youtube.com/watch?v=B4c-JKEU5TU

I see trouble....
http://www.youtube.com/watch?v=pT_E-qyOG9w

I'm looking to purchase a few small parts that I hope someone may have from a
parts car They are missing from my 64 Hawk and have caused the power steering
hoses at the control valve to hang quite low.
Part number #1309-99 is a Grommet that holds two hoses together going to the

And you thought clowns were dangerous!
http://www.pinkyluv.com/index.html

I have a bell housing for the 3 speed and late 4 speed that someone on here
is needing. What would be a fair price for him and me ? I don't want to
cheat him but I don't want to cheat myself.
Thanks,

It looks like next summer our 54 Commander Starliner will make an appearance
from storage. The tires, however, are too old to use any more, and are still
bias ply. As I don't have access to the car right now, can someone tell me
what radial size replaces the stock tires on stock ...

I remembered that I hadn't booked a room and called yesterday.  I think the
hotel is getting booked up.  SDC rate was $74.99/night.
Lee

A friend spotted this at Hot August Nights in Reno.
http://pro.imagehost.biz/ims/pictes/359403.jpg