Anyone ever seen these on a R series engine? If so, were they on the
valve covers?
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130018805627>

My shop manual has seen fit to go into hiding.
What size are the freeze plugs on a 259 engine??
I have a 259 out of a 1960 something Stude, that has been sitting for a
while.

Anyone know what piston cast #1557148 crosses over to part number wise?
The number is in a 289 V8.  I am trying to determine if it is an R1
piston.

http://cgi.ebay.com/ebaymotors/Studebaker-PRESIDENT-1956-Studebaker-President_W0
QQcmdZViewItemQQcategoryZ6466QQihZ002QQitemZ120024828183QQrdZ1
Mark
65 Cruiser
http://home.alltel.net/anderm

Well, I got clever and put the shop manual in a very safe
place..............
Anybody have the torque specs for head bolts on 62 lark 6 cyl OHV?
Mark (Duh) Dunning

I don't want to sound like I have been eating radishes, as in repeating
myself, but there is still some confusion as to
When REDSVILLE is. Its OCTOBER 27-29.   NOT in NOVEMBER
Thanks

IT'S ALIIIIIIIIVE!
Lee D. was kind enough to send along a Hurst 1-2 shift rod that
actually worked, and Brian Scott sent a whole old stock kit as well
(thanks to both, this group is awesome.)  So I can select all gears

I have heard from a member of our club that the owner of a 1948
Studebaker in California wants to donate their car to the Jimmy Carter
center here in Atlanta, Georgia.  A contact for the center has asked
our club for help in finding  someone to donate the transportation

Avanti Compression Ratio??
All 5 messages in topic - view as tree
From:  John Poulos - view profile
Date:  Thurs, May 28 1998 12:00 am

What is the Difference in the McCulloch and the paxton superchargers
used on the studes?
Thanks, James Maxey III

Cool video:
http://video.yahoo.com/video/play?vid=23af1dde394f5f83347374a6b24ed662.715691&cache=1

Great article Rick. What I want to know is if the Cornhusker Chapter is
going to put you to work in Omaha will you be the one serving the beer?
See you there!
Joe Roberts

Bought a little scooter to run around town with and save some gas. This
thing doesn't run right, has no power at all, dealer is no help. Know
anything about these? See pic:
http://home.comcast.net/~jdwain/scooter.jpg

Now that I put a repro dash in my Avanti,(elk + fawn) I need to know
how many variables there will be . as I will get repro seat covers, all
the front+rear upper pieces that are glued in before front+rear glass
goes in.how close can I expect all that to match the origional door

Any one installed a tow hitch to a 59 Lark?
Was it a modern off the shelf type unit or a home made unit?
I have had some in Australia but they all came off wrecked Studes and they
had an older style hitch set up.