Sent to me by a friend...
Subject: Child support
When someone puts in for Child Support, the proper thing to do is to
find=20=

It's Verified By Snopes.com
Let's all shop at
Sears!!!
I assume you have all seen the reports about how Sears

Some poor guy paid almost 5 K for a "Cheap Avanti" that was shown in the
Mythbusters junk yard scene.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=010&item=200020308338

I'm looking to changeout the rearview mirror on my Speedster to install
a day/night mirror. Anyone know where I can get one with a stem that
will fit into the roof housing?
Thanks in advance for any advice/leads.

When I got my 41 Champion the wiper arms and blades were in the trunk.  I
finally got around to trying to fit them on.  After a hour of fidding I
determined that there is no way these arms will fit this car.  Does anyone
know the length of the arms and blades that are correct for ...

I got home yesterday from my run to Armour, SD to retreive the first load
from Ken Voigt's sale. I took my, buddy, Jeff with me, & we loaded his
nearly new Chebby 3/4 tn truck and my brother's heavy duty 20 ft trailer up
on my 40 hauler, and left Houston on Tues afternoon. We ...

Any word how the Studes are doing in Michigan?

Folks that bought my car (Hawk) just recieved it,and their very happy. Just
had a nice chat on the phone. Only problem is it was covered in diesel smoke
and some dummy put the park lights on and let the battery go dead.They have
her cleaned up and are driving it. Heres the ...

The Studebaker only swapmeet is this Saturday in Hudson, Wisconsin.Hope to
see a lot of NG's there.Here is a link to more info.
http://www.northstarwheel.com/studeswap.html
Bob40

In the manual it states .018" clearance for the L-Head six but on the side
covers for the valves it has stamped in clearance cold .016".
I had a fluctuation in the vacuum readings at idle so wanted to adjust the
valve clearance. There appeared to be less clearance than spec. This ...

Great pics, Brian, thanks!!
http://www.hotrodhotline.com/feature/2006show/06whatcomcounty/

For a Studebaker truck reduced to $350:
"I'm not going to lower the price anymore you cheap bastards. The truck
is beat, but it's still salvageable. It's on my trailer and I'd be
willing to deliver it locally."

The hogtroughs should be pretty easy to install on this car. It only
needs a few little trim pieces to finish... <g>
http://cgi.ebay.com/ebaymotors/Studebaker-Avanti-Two-Door-Avanti-Body_W0QQcmdZVi
ewItemQQcategoryZ6466QQihZ019QQitemZ290029198033QQrdZ1
Matthew

Ok... so I'm getting into old boats as well as Studebakers... Especially
after finding out that Brooks Stevens did alot of design work for Evinrude.
Here's a 1960 Dorsett Catalina Cruiser as "designed by Raymond Loewy"...
http://www.fiberglassics.com/forms/forum818/showmessage ...

SILVER Dana 44 axle/differential
Got the "Differential Rebuilding" DVD from www.technicalvideos.com.
Great DVD, it had normal and Trac-Lock Dana 44. Came to two
conclusions: