Hey Guys, I need a pair of door hinges (drivers side), for my 1950
Stude pick-up. If anyone has a pair let me know and I'll send money,
Paypal or Money order.Thx.

Darn Goliath. He's been whinin' 'cause 'Sheba's room is all
hooty-tooty, decorated with neat things 'n stuff, i.e.:
http://www.davesplaceinc.com/sdcforum/24.jpg
So, I went and bought something for his room today:

Need a new or very good old Speedometer for the Transtar mine too a crap on
the way back from Omaha. It didn't like the cool air up there to start with
and then when I got in Memphis it start spinning the dial real fast and then
the dial blew off. So I pull over and took out the ...

I have a rebuilt Studebaker Power Steering Unit in my 64 Daytona
Convertible.  it has a drift that is uncomfortable.  It was originally
built with manual steering and I have had the quicker steering
installed.  The steering box has been adjusted but it still feels very

Bid here to agree to pay the high bid amount over FULL STICKER:
http://cgi.ebay.com/ebaymotors/_W0QQcmdZViewItemQQcategoryZ6236QQihZ010QQitemZ20
0033418962

You may find it hard to believe, but I have passed up the opportunity
to own my own '51 Starlight Coupe!  Come and git it!
http://www.davesplaceinc.com/51rust/index.htm
Dave Lester

I laid out the holes for the AC hoses on my Larks firewall the other night
based upon the installation instructions for the 1962 Larks. However the
placement of the lower hose looks like it will interfere with the cylinder
head or the exhaust manifold if someone ever decides to ...

Gee, it's good to be retired again!  <G>
DON'T ASK ME ABOUT THE CARS, I KNOW NOTHING!
http://www.davesplaceinc.com/womack.htm
Dave Lester

What is the differance between a 62 Hawk 4 speed,and 63/64 hawk 4 speed
on bolt spaceing?

I got a lengthy phone call from a gentleman in SW Missouri who has a
'64 Commander 2-dr for sale.
Paraphrasing his words: "original and complete"  60,403 miles, in barn
for 25 years, slight rust in trunk, perfect dash pad, perfect chrome,

Here's some pics from Sat at the Hershey AACA fall show.
http://photoshow.comcast.net/watch/CU5yE3PW

Was heading off this morning in my old truck to get a load of plants
and who was spotted going in the opposite direction?  None other than
Rick Courtier hisself...now what in heck he was doing ten or so miles
north of Tallahassee on US 27 is a good question...Rick, If I'd have

1.  1954 Stude "C" body coupe, has fiberglass front end, bumpers, dash,
trunk lid, & hood.  Hood has 1981 camaro Z-28 scoop (OEM- not a repro!)
with working air door.  body needs minor floor work completed and
firewall insert (was being set-up for big inch caddy engine).  Body

I have a freind who follows Wall street carefully,hes an investment broker
who looks after my meagre portfolio.(I should have enough to live well when
I retire at 65,as long as I don't get older than 67)
Hes been predicting a major meltdown, on Oct 26 as a matter of fact.

I have recently had my 54 commader V-8 232ci engine completely rebuilt.
It runs great, probaly has about 1000 miles on it. During normal
driving on the freeway the temp gauge reads in the lower 1/3 of the
scale.