A while back I saw on the newsgroup some interchange part numbers for the
turner brake setup. I thought I saved it but for the life of me , I can't
find it. Tried to Google it, but just can't come up with the right words.
Like for the pads what Napa part# ect. And what was the rotor ...

Im thinking about eBaying the complete gauge setup and panel from the
64 R1 Cruiser car I got, but Im not sure what kind of reserve to put on
it. Any thoughts ?
http://pg.photos.yahoo.com/ph/vwandstudebaker/detail?.dir=ddcare2&.dnm=fc60re2.j
pg&.src=ph

Bought this 52 today, mouse motored old rod, and I have no idea what
I'll have until it gets here:
http://www.stude.com/52Star/

This is the one we bought on ebay last month. It had been sitting for 25
years. Sal fixed the radiator and expansion tank, odds and ends and got
it running. It's cleaning up nicely, still need to attend to the brakes.
BTW, the hose sticking out the front is flushing the cooling ...

DiscoBaker #1 left for Wisconsin today....what a fiasco...  The buyer
is a complete novice to Studes and most likely old cars in general.  He
is paying almost as much to ship the thing as he paid for it.  I gave
him the opportunity to bow out after once again telling him in no

I got my judging sheet Saturday. I missed a 2nd place by 1 point. Let
me start out by saying if Pete Wendt was judging, I would still get a
third by legitimate deductions.
I lost 3 points for radials and non-matching spare. It clearly says at

In the early planning of the Caddy swap in my 59 truck I'll need to
research a Chevy wheel bolt pattern rear with a good highway ratio.
Someone suggested a Nova, someone else "thought" a Camarao rear would
drop right in. Any idea's on year and model to look for in the bone yard  ...

What did the factory do to avoid having the harmonic balancer and/or the
crank pulleys from hitting the ram or the it's arm in an R3 Avanti with
power steering? Is it possible to make modifications that will avoid this
problem while achieving some extra clearance under the hood ...

What happened to the red 53 Starliner 6 cylinder, automatic  that was on eBay
this morning? Allen

This morning about 11:15 I was driving south down PA 501 (Broad Street)
in Lititz PA and someone passed in the other direction in a bright red
63 (I think) Lark Convertible, 3 or 4 people in the car, top down, and
everyone I could see was wearing a hat (and I expect the heat was ...

Can a person change his highest bid on an item on Ebay before it is reached?
If so how?
Allen

I seem to be having some trouble locating a bolt-on Capacitive Discharge
Ignition system. (for the 63 Cruiser)
Anybody got a vendor name and/or recommendation.
Jim

I feel sorry for the poor bastards who work for him.  Look how many
employees he's lost in the past couple years.  That redneck from
Montana, who got fired for no reason; that won fat kid, who got fired,
just for standing up for his beliefs; and finally Charlie, who was

Did they make post model Commander Strliners in Canada?
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%
3AMEWA%3AIT&viewitem=&item=290040391999>

If anyone wants to see the article I can email a jpg - not sure if it's
kosher to post it here.