I was looking to replace the headlight bulbs in my 62 with the halogen
sealbeam replacements.  The bulb packaging states that the #1 bulb is 35/35
watts (35 on low and 35 on high) and the #2 bulb is 50 watts.  On low beam
you would have a total of 70 watts and in theory that ...

What do you guys normally see for vacuum gauge readings on a
well-tuned, stock R1?  I finally got my vacuum gauge hooked up today
and I am guessing that I have some tuning to do.  I suspect that I need
to do some tweaking on both timing and fuel mixture, but I would like

Look at the Sony Playstation 3's on ebay. It looks like most of the ones
sold ended up on ebay. The good news is ebay is making a killing on
fees, since most of the listing are 2K to a million and are not getting
bids, but those around $1500 are selling.

I posted the below to the SDC Forum and got some good info, but I thought
I'd expand the data base a little and ask you guys for additional input.
Next May-June the Potomac Chapter, SDC is taking another long trip (like our
6,000-mile Route 66 trip in '03, but further north). We ...

Out of a '66. Engine needs to be rebuilt, Flight-O-Matic and Rear axle
is flanged 27.
$100 takes all but you got to pick up (near Austin, TX)
Also have:

For a non Avanti powered GT. It makes the 30K I got for Goldie just last
year seem like a bargain.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=010&sspagename=STRK%
3AMEWA%3AIT&viewitem=&item=200047027237&rd=1,1

Thinking about changing to the quick steer arms on a 62 Lark with manual
steering.  Has anyone done this?  What were the results?  Any problems?  Any
downside?  Any pluses?
Ron

what is best for my stude?  Disco and NPR are must have options.

What do you suggest to use on floors that have flaky rust but are no where
near to needing the floors replaced?  Should you sand blast or wire wheel
them to clean them up?  What would you suggest for paint?  POR-15?  Will
POR-15 stick to clean meatal, or should you leave it rusty?  ...

Anybody know Mike Dotson?  He had a long and informative post about 1st gear
starts on here back in '02 and I wanted to talk to him about it.  He's not
in the SDC membership book.  Thanks

Did the Avantis with Small block Chevy power come with finned aluminum
valve covers?? If so,anyone have a pair they want to off? I am tired of
no name chrome valve covers that puke the useless rubber push in oil
fill caps. I want a twist in to seat design fill cap.Thanks!   Rich

for my '55 coupe:
driver's side window, pref. with usable tinted glass (the one Sal
supposedly had turned out to be a hardtop one, even though it came with
a coupe)

Doggone it, anyway.
This darn brown Suburban is starting to become my own personal great white whale.
After I got the leaking block heater replaced, I've been driving it exclusively for the
past few days, to get a few miles on the engine and see how it behaves. So far, it's run

George Carlin's new rules for 2007
New Rule:  Stop giving me that pop-up ad for classmates.com!  There's a
reason you don't talk to people for 25 years.  Because you don't
particularly like them!  Besides, I already know what the captain of the

http://www.atomfilms.com/contentPlay/shockwave.jsp?id=animator_vs_animation_2&pr
eplay=1
Lee DeLaBarre
Daytona62