Yeah , but yours would be the after picture, mine the before<G>

I am looking to put a Reese type hitch on my wifes 2002 Astro( of
course not with the idea to tow studebakers..........)any  way in the
reese type am I looking at a class 3 or 4 and do I want the 1 1/4 size
recceiver or the 2 in receiver preferably? I alway assume bigger is

Does anyone have a source for the round rubber shift linkage grommets for an
automatic transmission linkage?
Thanks.
Lee

First I'm needing to know what issue of turning wheels has an article
on Ambulets, or an article with them in it.  I'm curious to know
numbers, but I would also like to talk with anyone who has one, or know
if anyone has one for sale.

Did a "Red Line" tach come standard on a 63 GT Hawk?
Allen

What type of tach sending unit came on a 55 Speedster?
Allen

This car is almost at ten grand...and it's a POS compared to mine,
which isn't THAT nice... Proof once again that there is no real rhyme
or reason to ebay prices.  I love the guy's answer to one of the
questions...."beat up a classic"....  yeah, I let mine rot  in the

Imagine my surprise this morning, when a '64 Daytona was on the front page
of my local newspaper.
Inside was a nice article on the local dealer that was supposed to receive
the last production (non Avanti) from the South Bend Plant. Also was

My 1962 Champ with 259 has been running roughly of late and as I
suspected a new carb kit will not resurrect the old two barrel. From
reading the news group in the past a 500 cfm Eddlebrock four barrel
would seem to be the replacement of choice. I wondered if there were

My earthlink newsgroup server seems to be off line.

Jay Leno" interest in Avantis is well known.
I found this web page.
http://www.jaylenosgarage.com/video/index.shtml?vidID=45094
Bob

Anyone in southern California have a 64-66 Lark-type hood for sale?   I
also need the hinges and the torsion bars.
Scott Rodgers

I made a mistake by sliding a floor jack under the oil pan of the
truck, it dented the pan, now I have to pull the pan off, The issue is
that the cross member is in the way of the last 3 or 4 bolts,
To tight to get a extention between the pan and the cross member! Does

I made a mistake by sliding a floor jack under the oil pan of the
truck, it dented the pan, now I have to pull the pan off, The issue is
that the cross member is in the way of the last 3 or 4 bolts,
To tight to get a extention between the pan and the cross member! Does

Well, tomorrow morning it is supposed to be 23 degrees so I figure I
had better get to work on making the heater in the Champ work a little
better as I had planned to drive it to a meet a couple hours away.  I
had never noticed before the metal filter-like device that slides down