Does anyone have a good 6 volt generator for a 1954 Commander V-8
This would be of the Delco Remy flavor. The Delco number is 1102778.
The one on my Commander has given up and is making strange noises.
time to replace. If no one has one. Who stocks them. ?

I'm having one helluva time getting the rear hub off so I can get the brake
backing plate cleaned up.  I don't have the hub puller, yet.  How hard would
it be to just slide the rear axle out instead?  I can't tell from the shop
manual exactly how the axle is locked to the ...

couple of questions:
1) are the dimensions of a '58 Golden Hawk radiator the same as a '55 C/K
radiator??
2) can someone give me the dimensions of a '55 C/K radiator:

Are all our Florida members OK ?
 JP/Maryland
Studebaker On the Net http://stude.com
My Ebay items:http://www.stude.com/EBAY/

I have looked and found nothing.
Nick

My 20 year old sears air compressor is about shot. I
think its the electric
                 motor.Most of the new compressors are oil
Les.Sears,Home Depo

I need to replace the power steering pressure and return hoses and I'm not
sure how to identify the pump type.  The shop manual says it is either type
A, B or C.  Does anyone know how I can identify the pump type?
This is on a 56 President Classic.

Would these fit a Studebaker?
<http://cgi.ebay.com/ebaymotors/RODMASTER-HALIBRAND-STYLE-CHEVELLE-
MOPAR-FORD-
GM_W0QQcmdZViewItemQQcategoryZ43955QQihZ020QQitemZ300077076787>

http://cgi.ebay.com/ebaymotors/55-Studebaker-Commander-Coupe-Beautiful_W0QQitemZ
220078128987QQihZ012QQcategoryZ6466QQrdZ1QQcmdZViewItem

Has anyone replaced a 63 dash with a 64 dash? How much trouble is it? Does
the 64 dash fit right?
Thanks,
Henry

I think that I once posted the address of an English-language site
with a large amount of historical info on cars built in Eastern
Europe, dating back othe 1800s.
In the address was what looks like "digilander.libero.it/"

Finally got the carburetor done on the forklift; it was a real pain
for a little one barrel..'course it is a friggin' Zenith... Anyway,
started it up today and it runs great.  Forks go up and down, tilt,
wheels turn, all the gauges and even the horn work, but no GO.  It

The shop manual says to use a special spreader tool to install the outer
control arm bushings.  Does anyone have any suggestions on how to get the
outer control arm bushings installed if I don't have the spreader tool?
The inner bushings are also pretty nasty to get in.  The shop ...

Two boys are playing hockey on a pond in a Chicago Park when a crazed
Rottweiler suddenly attacks one of the boys.
Thinking quickly, the other boy takes his hockey stick,
shoves it under the dog's collar, twists it and breaks the dog's neck,

1542005 drag link/reach rod.  I just put in my last used one that is
half decent...and it's not THAT good.  The "usual suspects" have no
new ones.  I am checking into having some new ones made, but in the
meanwhile if anyone has a new one let me know.