Can someone please give me the full name or e-mail of Stewart
something at GM Korea? He is in the Design Team at GM Korea

"http://cgi.ebay.com/ebaymotors/Studebaker-1955-STUDERBAKER-PRESIDENT-
SPEEDSTER-
PROJECT_W0QQcmdZViewItemQQcategoryZ6466QQitemZ140096760372QQrdZ1"
Sure doesn't look like a '55.

Just curious if anyone has owned one of those portable battery 'hot
starts' from the auto parts store, and what kind of luck you had with
it.
Also, the little 12 volt air compressors. Is there one that will actually

Losing my storage so gotta let go of these parts for 53 coupe.
Trunk lid, , RR fender, F fender. Rear glass, windshield, hood with
hole cut for hood scoop. Located in SF area of Cal. Make a resonable
offer.  Used but useable, photos on request.  Scott @

http://www.costco.com/Browse/Product.aspx?Prodid=11157389&search=magellan&Sp=S&M
o=3&cm_re=1-_-Top_Left_Nav-_-Top_search&Nr=P_CatalogName:BC&Ns=P_Price|1||P_Sign
Desc1&N=0&whse=BC&Dx=mode+matchallpartial&Ntk=All&Dr=P_CatalogName ...

Will the 4 door Daytona gravel deflectors (pn 1558214, 1558215) fit on
the 1964 two door HT?  I have seen pictures of them on convertibles
and hard tops.
Richard

"http://cgi.ebay.com/ebaymotors/FRONT-FLOOR-PANS-STUDEBAKER-1953-64-
COUPES-
HAWKS_W0QQcmdZViewItemQQcategoryZ42611QQitemZ140097358942QQrdZ1"
Do I want these for my '64 Hawk with virtually no front floor or the

Before I reinstall another TH400 transmission in My Scotsman I want to
double check everything. One thought that occurred to me was that the
cracked case took out the U joint instead of the reverse. I know the
motor mounts both front and rear are very stiff compared to what I'm

I have an original Granetelli B103 R3 engine for sale.  Please email
me at nimeshsolanki@hotmail.com for information.   This is essentially
brand new and museum quality.  Serious inquiries only please.
Nimesh

Hi, everyone.  I have posted pictures of the engine at
http://community.webshots.com/album/558213626QWJeYY
The engine has been restored to new condition and better than what
came out of the Granetelli facility.  I am a master engine builder and

I listed some used parts on eBay last week (things I carried to
Reedsville/York years ago with 50-cent prices and didn't sell).  One is a
used right side 57-61 Hawk tail fin cap.  I described it as pitted, but ok
for a driver.  Then I dropped a box on it and cracked it.  I put ...

You guys never told me that changing wheel studs on my 55 was going to be
such a PIA.  I drove across town and got a tool to remove the hubs.  The
drums came off the hubs without incident but then easy ended.  These studs
didn't have some wimpy staking, they were pressed into the ...

Can someone give me contact information for this regisry. The
information I have is dated February 1992. At that time there were 210
cars listed.

Hello everyone, it's been a long while since I've spent any time with you
and the group.  I'm hoping to be able to do so in the near future now that I
once again have contact!
I'm wondering if, while I've been out of touch, if anyone has gone forward

Have any of you had a headliner "successfully" installed in a C/K without
pulling the windshield and back glass?
Dexter