Some time ago I saw a link to a guy who makes detailed toy Studebaker
dealerships.  Cannot locate the link.  Anyone help with a current link.
Thanks.
Ed

Who carries repo's of  the 1954 oval shaped pedal rubber?
Thanks
Alex

Would one of you gentlemen be kind enough to tell me what the bore size is
in the master cylinder of a '55 C/K
Thanks in advance
Dexter

I bought a brush/roller on bed liner kit on ebay for my Caddy powered
Scotsman. I'm very happy with the result with two coats and some left
over for touch up. It's here:
http://cgi.ebay.com/ebaymotors/_W0QQcmdZViewItemQQcategoryZ33655QQihZ012QQitemZ2
20131958805

eBay: http://easyurl.net/1935_Dictator

The Secret of Magic Tricks are revealed here! Learn street magic
tricks, bar magic tricks, card tricks, coin tricks, etc. Easy lessons
and magician secrets revealed. Dedicated for beginners who want to
start learning secret magic tricks step by step.

I have a new trunk seal for my 53 Coupe that I got from Studebaker
International.  The seal that was in there is a generic one I think, since
it was cut at the corners.  The new one has a flat side with a flap and a
grooved side.  There were no instructions, which side goes up?  ...

Some time ago I saw a link to a guy who makes detailed toy Studebaker
dealerships. He had several different eras to choose from.  Cannot locate
the link.  Anyone help with a current link?
Thanks.

I am now officially a hillbilly, sold house in Fl (still have rental
property there) and now call Clinton, SC home.  Moving into old mill
cotton shed (100' x 40') as my garage next week.

i'm new to this site and new to propane conversions. i'v did alot of
searching and reading on the net about propane conversions. i'v already
bought most of the parts i need to do the conversion but still have a few
questions. i know  the impco 425 will bolt to a holly base plate ...

I have a rear fender for 54 coupe to ship cross country.  Any
suggestions to shipping lines and how to pack it would be
appreciated.  Was thinking of cutting down a bicycle box and shipping
Greyhound Bus.  Any suggestions welcome.  Thanks, Scott

eBay: http://301url.com/Stude_history

The 31 swtreet rod that I just bought had a brand new 1411 Edlebrock 750
cfm, electric choke, non emissions carb on it.  It was a tad too much for
the engine.  I put a new 1406 600cfm carb I had here on it and it made a
world of difference.  Summit is asking $299 for their's, I ...

I bought all new hoses and rebuild kits for the pump and control
valve.  After putting it back together, it was fine sitting in the
shop at idle for 15 minutes.  After a drive of about 15 miles it had
leaked enough to drain the reservoir.  I checked again and one of the