| Thread | Last Post | Replies |
|
| Need email addy for Tom Pfahler... | 19 Nov 2007 05:22 GMT | 1 |
oh Paradise PA- Can anyone help me out?TIA !
|
| Reedsville suprise ! | 19 Nov 2007 04:01 GMT | 2 |
Got a suprise package from amnotR2 via the Fort Wayne Express
today.What a great couple of friends a guy could have!! Thanks Rich
LaTorre and Lee D. It will be enjoyed!!!
|
| C Cab steering | 19 Nov 2007 02:48 GMT | 10 |
Any suggestions for adding power steering to a 1953 C cab with a 350 Chevy
engine and stock suspension? I would like to change to a tilt wheel column
also.
Allen
|
| Stuff for sale | 18 Nov 2007 18:18 GMT | 5 |
I have a complete R2 engine for sale. I rebuilt it about 10 months
ago and installed it in an Avanti and drove it about 500 miles. I
pulled the engine out to put in a hot cam, different heads, and
springs but never got around to it. This engine is an unstamped
|
| Early SI tach sender | 18 Nov 2007 13:36 GMT | 2 |
I have an SI replacement rectangular tach sender that is a few years
old and missing the instructions for wiring it up. The new ones they
sell have different color wires and so far they haven't found any info
for me on the older ones. The one I have has four wires; black,
|
| first time Ebay lister- ? | 18 Nov 2007 05:45 GMT | 4 |
I am about to go where I have never gone before.....I am putting my
1963 2 dr. R1 super lark on E- bay, unfortunately...can some one
simply give me an idea what are end resulting fees from vehicle
listings that I should expect in the end.......I have purchased on e-
|
| Butched-up eBay Stude - Whodunit? | 17 Nov 2007 03:26 GMT | 5 |
There must not have been much to begin with, or this guy butched up a
good car.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=001&sspagename=STRK%
3AMEWA%3AIT&viewitem=&item=110194083620&rd=1
|
| 2R cab on 1/2Ton "T" cab. | 17 Nov 2007 00:50 GMT | 3 |
Are the 1/2 ton Chassis the same?
Can you mount a 1951 "C" cab on a 1961 "V8" chassis without a lot of
problems?
Bob Kapteyn
|
| Hawk Hood Hinges | 16 Nov 2007 20:06 GMT | 2 |
The drivers side rear hood hinge on my 1958 Golden Hawk came loose and
creased the hood in the corner. Is there a better way to attach the
hood hinge to the cowl? I currently have a nut and lock washer on it.
|
| Slide show of stainless steel Avanti chassis. | 16 Nov 2007 18:47 GMT | 2 |
Recently finished welding body mounts to the chassis.
Here is a brief slide show if you want to see some recent photos of
the stainless steel Avanti chassis.
http://www.electro-dynamics.com/chassis/avantislide.html
|
| Bad news today | 15 Nov 2007 14:34 GMT | 28 |
Just got the pathology report back, & the better half, Pam, has B cell
lymphoma. After enduring weeks of worsening back pain, she suddenly lost the
use of her legs 2 weeks ago & I took her to the hospital. They found a tumor
on her spine & removed it last Sat. The back pain is gone ...
|
| Saginaw power steering box rebuild advice. | 15 Nov 2007 03:28 GMT | 5 |
Need recommendations for a good rebuilder for a saginaw power steering box.
Thanks
Ron
|
| What happened to "There is all ways a first time"? | 14 Nov 2007 05:27 GMT | 2 |
Did the individual settle up, or is it a case of the same ole same ole?
|
| Seeing inside of a running engine- video | 14 Nov 2007 05:22 GMT | 2 |
Check this out
http://www.liveleak.com/view?i=73e_1192001762
|
| AFB- Throttle Shaft Re-bushing kit | 13 Nov 2007 05:20 GMT | 3 |
I need to rebuild my AFB on my R-2 Lark. I sent it out once and got
it back with what I will refer to as a cosmetic restoration. It had a
new Factory warning sticker on it, all nice and clean and pretty.
However the shop manual calls for sealing all of the screw holes with
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread