1929 president parts include,head , crankshaft, starter ,rotors &
caps, some sheet metal includes splashpan / aprons, front cowl for 30
touring,timing gears NIB, rolling chassis with 1930 engine , email for
more info

Nissan Cube 2010
The Nissan Cube 2010 is a 4-door, 5-passenger wagon, available in 4
trims, ranging from the 1.8 Base to the 1.8 Krom Upon introduction,
both trims are equipped with a standard 1.8-liter, I4, 122-horsepower

I need a rebuildable Delco Window distributor for a Stude V8. Who
wants to sell me one??
Matthew

There were about 30 people at Curtis and Alice French's garage Saturday.
Curtis has been especially guilty of inspiring the envy of every man. He has
a huge garage and half a dozen very nice 'toys'.
Only three present from the Peach State at the meeting. Next meeting will be

As some of you may remember, I have a '51 2R that is running a '51 232
V8 with a T86 OD trans. I have had the truck for some 35 years now and
still continue to drive it nearly every day.
The clutch linkage is bad at best. The clutch shaft on the bell

What is your guess as to the exact date the wrecking ball starts on
the old SASCO/Stude building?
Not wanting to disrespect the overly sensitive masses over on the SDC
forum.(<gg>)...

Sorry that so many places want to bury our past history...They took down our Sydney Steel Plant so fast we never had time to think and see the site for what it was and is now...Nothing...If left alone people would have paid to see what we did there for 100+ years...Lots of go ...

Today, I took the instrument cluster apart to clean the inside and replace
bulbs etc. I wiped off the numbers and letters on the glass. I could only
smile and think "Shoulda took a picture".  I am a bit mystified how to
remedy this or to even bother.  Was this a decal, paint or ...

Belad we can't post pic's here......
I have a high ceiling in my living room....
(20' or so high to the center ridge beam).
Room needs paint.

So, yesterday I went down to the Oregon DMV and produced my letter from
the VA saying I am disabled and fall under the guidelines for permanent
disabled plates.  Gave them my $20.00 and they gave me a temp to stick
in the window while I wait 3 weeks or so for the plates.  Got ...

Well tomorrow I should know if my "Frankenstein" transmission will
work...pieces from a Zip Van trans and a regular FOM with a couple
little things extra...
I have been messing with this on and off for a year or more and

go here
http://www.cars.gov/files/official-information/trade-in-vehicles.pdf
and look at the first entry under ASC.