| Thread | Last Post | Replies |
|
| Valve Tapping Noise | 28 Mar 2005 20:15 GMT | 2 |
I have a 2003 Baja with 39,000 miles. When the weather is cold, I notice a tapping noise coming from the engine. This noise continues until the engine is sufficiently warm. This noise happened even when the car was new. Is this a problem? According to the dealer, this is not a ...
|
| Starting my engine - 02' Forester | 27 Mar 2005 23:15 GMT | 1 |
Dear SUBARU experts, I'm taking my Forester to it's scheduled 50K miles maintenance soon. About a month ago, I noticed I now have to turn the engine a bit longer before it will start, only first thing in the morning. The rest of the
|
| Subaru Impreza, hard to start, check engine light on | 27 Mar 2005 21:30 GMT | 6 |
I have a 95 Subaru Impreza. In the last 6 weeks the check engine light goes on and off. At cold startup it is always on. In the last week it has been on permanently. With the key in the on position the system runs the fan at all times
|
| R 3.0 Special | 27 Mar 2005 21:03 GMT | 1 |
Does anyone know when the upscale Legacy which is for sale in Europe, Australia and NZ will hit the US market ? Guy
|
| Stereo in Forester | 27 Mar 2005 16:06 GMT | 1 |
Just wondering if anyone had come across instructions on removing stereo from 2003 Forester X? Can anyone confirm if you can put a double din unit in? TA
|
| botched halfshaft replacement! need help | 27 Mar 2005 12:15 GMT | 1 |
i tried today to replace the drivers side halfshaft. i misread the instructions and pulled the shaft out of the differential with the diff's gear stub still attached. i reinstalled the new shaft and test drove it. i realized by the 15th foot of my driveway something was wrong, my ...
|
| Forester Axle Bearing Problem in Hawaii | 27 Mar 2005 10:53 GMT | 5 |
Just another witness to the recurring axle bearing problem. Happening to our 2000 Forester L. Thanks to the many who are posting solutions to it. However, here in Hawaii, we're in a pickle.
|
| Impreza Roof Rack | 26 Mar 2005 10:19 GMT | 5 |
does anyone know hot to remove the plastic strips on the roof of an Impreza? I am trying to fit a roof rack and was told that there are some anchors below these strips. I dont want to damage anything by just
|
| Clutch problem with 2005 Legacy GT | 25 Mar 2005 20:04 GMT | 1 |
I live in Colorado, and was recently stuck in a traffic jam at the I70 Eisenhower Tunnel, at 11,000 feet. The grade there is about 5%, and I had to move forward many times in about 20 minutes. I was NOT holding the car in place by slipping the clutch, but it started to smell ...
|
| Legacy Clutch Replacement | 25 Mar 2005 16:53 GMT | 2 |
I think my clutch will need replacement soon. Sometimes when I try to accelerate, the revs increase but the speed doesn't. :-( Anybody know how difficult it is to replace a Legacy clutch? I have a feeling it will require the removal of the gearbox or engine and I
|
| XT or H6 for Towing | 24 Mar 2005 14:31 GMT | 6 |
Plan to tow a boat, around 2000lbs. Driving distance could be from 30 to 150 miles roundtrip and up some grades. Which platform should do better the turbo or H6? TIA...bgin
|
| tires on a budget???? | 24 Mar 2005 12:15 GMT | 11 |
'99 Impreza OBS. Key word here is "budget". I don't have $600 - $1000 to plunk down for new rubber. I'm looking for quiet, good in rain/snow, and hopefully around 60k mile treadlife. Suggestions?
|
| First ever problem (UK) | 24 Mar 2005 10:12 GMT | 6 |
In 11 years of Subaru ownership...Impreza Turbo, Forester Turbo Sport and currently 002 WRX... I've had my first real problem...which is also puzzling the hell out of me.
|
| Get path from filename | 24 Mar 2005 06:32 GMT | 5 |
What's the easiest way to get the path from a fully pathed filename? For instance, given C:\Some Directory\And Another Directory\My Word Document.doc I'd like (with or without the trailing slash)
|
| Recurring wheel bearing problems (Forrester) | 24 Mar 2005 01:15 GMT | 10 |
G'Day all, A little question regarding wheel bearings on Subaru's. A friend of mine has a Forrester and about three months ago the rear wheel bearings had to be replaced.
|