| Thread | Last Post | Replies |
|
| `00-`04 Outback Radio Antenna | 21 Jan 2006 02:39 GMT | 3 |
One thing I have noticed since purchasing my `01 Outback is that because the antenna is stuck to the left rear cargo window, reception of distant radio stations is much poorer compared to my mom's `95 Legacy L which has the metal antenna that slides down into the car frame and ...
|
| Question about 2001 Shifting. | 21 Jan 2006 02:01 GMT | 11 |
I have one question about the shifting of the 2001 Outback that I purchased. Upshifting the vehicle works great. Shifting up through all of the gears is extremely smooth and all is well. Even downshifting through the gears is smooth until I shift from 2nd gear to 1st gear. I ...
|
| anti lock brakes | 20 Jan 2006 16:40 GMT | 12 |
I was driving my son's 95 Legacy wagon today and the ABS light went on. The weather was snowing so I pulled into a rest area and tried the brakes. No ABS. We noticed after I turned the car off that there was a noise in the
|
| '05 Forester: recommendations? | 20 Jan 2006 14:37 GMT | 11 |
I'm about to ditch my '94 Legacy wagon for high mileage and expensive repairs. I'm considering replacing it with a 2005 Forester, 5 spd, about 50K miles on it. The price is $18,000. My thought is that if I'm going to spend that kind of money on a car, I'd rather spend it up front ...
|
| Impreza water pump gasket - sealant required? | 20 Jan 2006 03:51 GMT | 3 |
Sorry about the million questions, but do both the water pump gasket and thermostat gasket require any sealant like permatex? Or does one both slip them in? The manual doesn't state it and was wondering if that was by mistake.
|
| 05' WRX and Forester XT | 20 Jan 2006 01:39 GMT | 3 |
Is reliability of the 05' WRX and Forester XT (turbo engines) on par with non-turbo models? I mean long term use like 200K + miles. A.
|
| '05 Forester XT (USA) Whistling noise | 20 Jan 2006 00:28 GMT | 7 |
I recently noticed that my 05 Forester XT developed a slight whistling noise.Sort of like air whooshing. I notice it on moderate accelleration, and as soon as I back off slightly on the gas pedal, it goes away. Anyone else had this problem? No changes have been made in
|
| 87 Legacy Wagon | 19 Jan 2006 22:40 GMT | 3 |
So my girlfriend just picked up an 87 legacy wagon with 160k on it. Has hi/lo 4wd. Runs and drives ok. Got a couple quick Q's Q1. The engine started getting warm driving it home, but before reaching critical it cooled down to a normal temp (presumably the
|
| 2001 Subaru Forester S | 19 Jan 2006 22:38 GMT | 4 |
I am writing for a friend who has a 2001 Subaru Forester S. Here is the information: Information: 2001 Subaru Forester S with 67,800 miles.
|
| Charcoal canister? | 19 Jan 2006 22:34 GMT | 4 |
I am wondering about the charcoal canister on my recently purchased 87 GL wagon. Carbuerated engine. First off I want to make sure it's the charcoal canister. It's located on the passenger side of the engine down from the spare tire, about the diameter of a can of soup, but not
|
| Oil Filter Advice Needed... | 19 Jan 2006 22:33 GMT | 5 |
I have a 2002 Legacy wagon with the 2.5 liter 4 cylinder. Have been using the Subaru oil filter no. 15208aa060 which is made
|
| 99 Outback Legacy Wagon, engine stuttered, Chk Eng lit up, now runs OK | 19 Jan 2006 22:27 GMT | 4 |
I've got a 99 Legacy Outback wagon (4-cylinder). Three weeks ago, at 78,000 miles, the clutch failed. The car was across the street from a service station, so I pushed the car into their parking lot and had them replace the clutch. ($689 including tax.)
|
| Subaru fog lamp switch wiring | 19 Jan 2006 22:02 GMT | 4 |
I have a 98 Outback sport (Imprezza) and recently after a long (4 day) journey to a small town I decided to get a quick fluid and tyre service and have some fog lights installed. Needless to say the fog lights worked fine, but the switch was a real cheapy with no on light that ...
|
| Philadelphia mechanic? | 19 Jan 2006 12:57 GMT | 6 |
Any recommendations for a good Subaru mechanic, or even dealer, in the Philadelphia PA area? Thanks!
|
| EJ20 Engine CAD drawings | 19 Jan 2006 07:03 GMT | 1 |
Hey all, Anyone know where I might be able to find some CAD drawings of the EJ20 engine? Thanks, Sarah
|