| Thread | Last Post | Replies |
|
| XT vs. XT - clearance | 17 Apr 2006 07:16 GMT | 25 |
I was told (or maybe read) that the 2006 Forester XT ground clearance is lower than the other members of the Forester line to enhance the handling. OK, that makes sense. Then why is the 2006 Outback XT ground clearance greater than the other Outback flavors offered? Just ...
|
| Please help! Headlights turn off when High beams are activated | 17 Apr 2006 02:49 GMT | 9 |
For a '95 Subaru Legacy 2.2L SOHC If anyone has a wiring schematic it would be a big help to me. I get no voltage in the high beam wire (measured at the headlight) and the impedence in the ground wire changes from like 40 ohms to zero
|
| 1997 Outback Legacy Wagon: Can I get FULL control of the heating/cooling? | 17 Apr 2006 01:51 GMT | 8 |
It is hard to believe I have lived with this frustration for 9 years! So here is my question: Is it possible to get full control of my heating/cooling system? Right now there is a relay (or other unknown mechanism) that based on my
|
| 99 outback transmission problem | 17 Apr 2006 00:54 GMT | 3 |
My 99 subaru outback has a transmission problem. When you put it in drive it doesn't engage right away. Sometimes takes 20-30 seconds of stabbbing the accelerator. Dealer says it's got an internal transmission problem and the trans will soon die. Anyone have any
|
| OEM Subaru parts catalogs for sale | 16 Apr 2006 16:49 GMT | 2 |
I have the following OEM Subaru parts catalogs for sale on microfiche. I also have OEM Subaru parts discs that cover 1985 to 2004 models. Drop me a line with any interest. Thanks, Joe. SUBARU 77-79 1600 Jul-80
|
| 10-Year Air bag Maintenance/Check ?? | 16 Apr 2006 01:56 GMT | 12 |
My '97 OBW will be 10 years old this Fall. I seem to remember that the air bag systems need to be checked after 10 years. Has Subaru extended this policy? As a separate question, how reliable are the air bags after
|
| Noisy brakes - 2001 Outback | 16 Apr 2006 00:41 GMT | 7 |
When I test-drove and then bought my 2001 Outback Wagon, I heard a low-pitched, smoothe squeak when backing up and braking, like backing out of the driveway. The former owner says it's always that way and should be able to be fixed. When I had the brakes done, the pads were
|
| Seatbelt chime | 15 Apr 2006 23:26 GMT | 2 |
Can I disable the seatbelt chime in my 2006 Legacy?
|
| HELP!! How do I 'value' my car for resale??? | 15 Apr 2006 21:54 GMT | 4 |
Hey, all. I have an 02 silver WRX Wagon which I've had on lease for 4 years. I've been a light driver; the mileage on the car is about 26,000 miles (42,000 km). I got it new, so I know exactly what it's been through.
|
| Programming keyless remote | 15 Apr 2006 21:18 GMT | 3 |
I found a spare keyless remote on Ebay for a pretty good price. I googled a website that said that there was a programming button "by the driver's left knee" on the kick panel, and that if it wasn't visible it may have been tucked up into the wiring harness cluster.
|
| The worst nightmare for an air traffic controller | 15 Apr 2006 12:04 GMT | 8 |
As if the airspace is not congested enough now there is this: http://biz.yahoo.com/special/bigcars06_article2.html
|
| changing automatic tranny fluid at 95k miles first time | 15 Apr 2006 11:43 GMT | 3 |
would it harm the car ('02 Impreza 2.5 TS)? Thx, A.
|
| Certified Pre-owned | 15 Apr 2006 03:06 GMT | 1 |
Some questions for those of you who may have purchased in Subaru's certified pre-owned (CPO) program. I am looking for good ways to search for CPOs from dealers outside my local area, and I am considering how to work with my local dealer for maintenance and
|
| Castrol Syntec Blend Question? | 15 Apr 2006 00:35 GMT | 16 |
I need to add some oil, but in checking the oil tag in the window, found out that Subaru dealership used Castrol Syntec Blend. Do I have to go out and find this exact blend or is okay to mix with regular oil? Do you always need to make sure you have the same weight too... if ...
|
| '95 Legacy LSi Sedan... | 14 Apr 2006 18:45 GMT | 2 |
Greetings all, Doing the brakes on my Legacy last night and I stripped the Wheel stud. I was able to get the stud knocked out of the hub and picked up new parts at the dealer tonight. I tried to get the stud out last night and with the one
|