| Thread | Last Post | Replies |
|
| 2003 wrx wagon rear bicycle carrier | 06 Sep 2006 18:21 GMT | 2 |
Does anyone know if I can get a rear mounted bicycle carrier for my 03 wrx wagon? I am at work so I don't even know if the car has a place to attach a bike rack on the back... thanks in advance
|
| "Turning rims" | 06 Sep 2006 14:48 GMT | 3 |
Hey, all. Over the 4 years I've had my WRX, I've had a couple of unfortunate runins with curbs. There's a few inches of scarring on the wheel rims. I gather that I could take them into the shop, and have them 'turned',
|
| Occasional fail to start when engine warm | 06 Sep 2006 04:50 GMT | 16 |
My 1996 Liberty / Legacy 2.2 L has a problem starting once the engine has warmed. The problem was first noticed about 3 years ago. At that time it only occurred about once every 2 to 3 months. As time passed the rate of occurrence gradually increased. It is now likely to
|
| CEL caused by DC emission test | 06 Sep 2006 02:53 GMT | 6 |
my 2001 Outback went through DC DMV vehicle test yesterday, and the check engine light was off when it went in and on when it came out - I'm assuming that it has something to do with the emissions testing? Anyone know whether it is likely to go off on its own, or is this going
|
| 1993 subaru legacy | 05 Sep 2006 15:39 GMT | 2 |
i have a 1993 subaru legacy 2.2lt 4 cylinder and i had a new water pump and new belts put in and white smoke comes out of the vents and it overheats any help would be greatly appreciated
|
| WOO-HOO! Grounding mod works! (02 WRX) | 05 Sep 2006 02:27 GMT | 15 |
Hey, all... So - for the longest time my car would hesitate slightly as I accelerated between 3000 and 4000 rpm. Just felt a bit shaky in that range, regardless of gear.
|
| Legacy GT difficult to downshift from 5-4 | 04 Sep 2006 02:38 GMT | 1 |
I have had a problem downshifting from 5th to 4th on my 05 legacy gt wagon with 5 speed manual. Yes, I push in the clutch all the way, but for some reason on some occasions it just won't shift into 4th although I can brake and shift directly into third. I wrote to SOA about it, ...
|
| 90 Legacy door lock | 03 Sep 2006 16:19 GMT | 3 |
the Driver's door look is not working properly. The key will not unlock it and it seems to want to stay in the "locked" position. Sometimes I can push the rocker into the unlocked position and it will stay there ok. Is this an easy fix? Where do I start?
|
| How to find paint for my old car? | 03 Sep 2006 02:56 GMT | 2 |
1992 Subaru Legacy L wagon Generally I'd describe the color as gray. I found the paint code 249 atop the front driver-side strut tower on the plate there. According to Duplicolor's web site, 249 is "Liquid Silver Metal". However, when
|
| Contributers for WRX Modifications | 02 Sep 2006 18:50 GMT | 2 |
Hey everyone, I have a new WRX site ( http://www.diywrxtuner.com ). I wanted to know if anyone would like to contribute their mods, or have their WRX profiled on the site.
|
| Rear View Mirror Going Funky | 02 Sep 2006 03:19 GMT | 4 |
I have a 2001 Subaru Outback, and the rear view mirror looks like it is losing fluid; it is green up to about 1/2" from the top, then it becomes clear. Is there a cheap fix or source for this mirror? It is an auto-dimming style
|
| EA81 pushrod, EA81 OHC... are bell housings the same? | 01 Sep 2006 22:40 GMT | 2 |
I have a sandrail with EA81 pushrod engine... It needs about $600 of work done to it.. I found an EA81OHC engine... will this bolt to the transmission OK? Were the same bell
|
| 1995 Impreza steering rack replacement. | 01 Sep 2006 06:10 GMT | 1 |
A few questions for a mechanic or anybody knowledgable. Any help is appreciated. My mother has a 1995 Impreza sedan with about 90K miles on it. She gets the oil changed fairly regularly at a "grease monkey", or similar
|
| 1998 outback limited subwoofer | 01 Sep 2006 04:06 GMT | 1 |
1998 outback limited subwoofer. Does anyone have one with a harness for sale? glassamps@aol.com
|
| Reading the Forester's Dip Stick | 01 Sep 2006 01:07 GMT | 6 |
I always have trouble reading the car's dip stick. It's clear that there are three markers: 2 holes and a notch. Nevertheless, after wiping the dip stick with either a cloth or paper towel, I still find it hard to rip. Any tips on this? Food dye in the oil? >-) A special flash ...
|