| Thread | Last Post | Replies |
|
| 2008 Tribeca info | 08 Apr 2007 12:04 GMT | 5 |
http://mag.subiesport.com/index.php?option=com_content&task=view&id=61&Itemid=41 http://www.autoblog.com/2007/04/03/new-york-preview-2008-subaru-tribeca/
|
| Accuracy of Gas Gauge. | 07 Apr 2007 21:30 GMT | 7 |
Is your gas gauge accurate? Here's the problem I now have with a USA 2005 Subaru Forester XT.
When traveling on a long trip, and starting with a full tank (not
|
| brace for impact | 07 Apr 2007 18:26 GMT | 2 |
More electronic sh.t is coming our way! Brace for impact! http://www.autoblog.com/2007/04/06/nhtsa-to-require-anti-roll-tech-on-all-cars-b y-2012/
|
| Rear shaft boots | 06 Apr 2007 20:11 GMT | 7 |
I've had a squeak in my left rear wheel for about a week. Seems like brakes, so yesterday I pulled out the pads and checked them out...the tab that makes noise is still just over 1/8 inch from the rotor. Lotsa life left there, apparently.
|
| 98 Forrester S timing belt replacement | 05 Apr 2007 22:52 GMT | 2 |
My daughter is determined to drive her Forrester cross country this summer. She got the car 3rd hand and maint. records are unknown. I'm sure I will need to replace the timing belt, as well as the other drive belts for ac, alt, ps etc. I need a diagram for the timing
|
| Beware of data CDs on ebay | 05 Apr 2007 17:51 GMT | 7 |
Beware of auto data cds on ebay This user was suspended "prologiss" there are others, keep an eye out. Incomplete data is an understatement.I
|
| Trying to remove housing over defroster/fan output = 02 WRX | 05 Apr 2007 17:12 GMT | 2 |
I have an 02 WRX wagon. I'm currenly becoming a little obsessive about the little rattles and noises I'm hearing in my car as I go over bumpy roads or crank my stereo.
|
| 97 subaru legacy outback : Engine Rebuild/Tranny rebuild/replace | 05 Apr 2007 07:33 GMT | 3 |
My questions: Going to need to rebuild my Subaru engine soon.10 Y 155k w/ 1 head gasket replacement @ about 100 k. Downtime is a problem, so considering buying used engine and rebuilding, then swapping.
|
| Do all 4 tires need to be replaced when just 1 goes bad? | 05 Apr 2007 02:06 GMT | 28 |
Because of AWD, I figured when one of the tires (front left) was damaged beyond repair that I would have to replace both. That is, due to difference in diameter for an old and new tire, I would have to replace both tires on each end of the axle. That was also the recommendation ...
|
| 95 Legacy GT - ABS wiring | 04 Apr 2007 20:01 GMT | 3 |
I've posted my problem previously of the ABS light illuminated. I have checked the two relays at the pump to be functioning OK. I'd be grateful if anybody could send me a copy of the wiring diagram for the ABS system to help me do further testing.
|
| Subaru WRX - high, increasing revs when idle in traffic | 04 Apr 2007 14:39 GMT | 10 |
My car is a 2005 Subaru WRX Sedan. It has 37000 miles and has had all the regular servicing. Last night I did some highway driving (25mins) and then was in city center stop/go traffic. After about 10 mins in the congestion the revs
|
| Maintenance & Warranty Manual | 04 Apr 2007 05:24 GMT | 2 |
I've got a '03 OBW that I just bought used this winter. The Owner's Manual has no service schedule in it and just refers to a "Maintenance & Warranty Manual" that I don't have. Can I download/print this M&W Manual from somewhere? It's got 61K on it now and I need to know
|
| Radiator | 04 Apr 2007 01:33 GMT | 1 |
Was wondering if anyone knew how much it would cost to change the radiator in a 1995 Subaru Legacy Sedan. Cost of new radiator and labor?? Thanks.
|
| Upcoming timing belt change: what else? | 04 Apr 2007 00:40 GMT | 6 |
I've got a 2001 Forester (U.S.), coming up on 105K miles. That's when they recommend the timing belt change. So I'm thinking up what else I should have done at the same time. I have every intention of keeping the car for at least another 105K.
|
| 97 Outback Subaru with over heating problems. | 03 Apr 2007 16:02 GMT | 1 |
I have a 1997 Outback with overheating problems. My mechanic found residue of gas inside the coolant overflow reservior. He said this is due to a head gasket problem.
|