| Thread | Last Post | Replies |
|
| exhuast smell on hills with 96 subaru legacy automatic 150k | 23 May 2007 23:27 GMT | 1 |
I guess it is the cat converter smelling, but I am getting about 28mpg on road. Does that mean or sugest my fuel mix is okay and there is a problem with converter? and is okay to just let it go? thanks steve
|
| EA82 piston pin | 22 May 2007 18:08 GMT | 1 |
Anybody know piston pin size and height.
|
| '01 Forrester Radio fit a '97 Legacy? | 22 May 2007 17:58 GMT | 1 |
Will the 6CD changer head unit from my daughter's 2001 Forrester fit in my son's 1997 Legacy? I changed out the radio in my daughter's car for a head unit with an ipod port and right on cur, my son's radio died. Will the radio fit? Are the plugs and connectors going to be ...
|
| Transmission noise - at what cost? | 22 May 2007 01:49 GMT | 6 |
'92 Subaru Legacy L AWD station wagon non-turbo automatic 138K miles I got the front left wheel bearing replaced. It was making lots of noise. Now with that noise gone, I hear another. When starting cold
|
| Slipping Transmission on a Liberty 1992GX | 22 May 2007 00:26 GMT | 2 |
I seem to have had a problem where by i drove about 20 km's and then went to pull away from a set of traffic lights and the car accelerated and become somewhat stuck in 1st gear. After i took my foot off the accelerator and re applied it it was staying in 1st gear and (really
|
| QUESTION: What is this discoloration on the rubber trim?? | 21 May 2007 02:18 GMT | 14 |
I have a 2002 Subaru WRX Wagon. I recently noticed some discoloration along the rubber trim that surrounds my windshield on the outside. It's kind of whitish and blotchy - like saltwater might stain
|
| Sparkplug removal ? | 21 May 2007 01:21 GMT | 1 |
I have a '99 outback with the 2.5l engine. It takes quite an effort to remove the spark plugs on this car because there is so little room between the heads and the fenders. I first have to fish in the scoket, then the extension, and then the ratchet wrench. After a few partial ...
|
| Subaru Wont Start after timing belt replacement | 21 May 2007 01:13 GMT | 5 |
I have a 94 Subaru Legacy. 2.2 liter The timing belt broke. I replaced it. I lined up marks and counted teeth. I put it back together. It wont start. I checked compression. 150 pounds on all cylinders. I put on a timing light. It is firing about 90 degrees
|
| OBD II compliance on '95 Legacy standard transmission | 21 May 2007 00:50 GMT | 14 |
Can anyone with a standard transmission '95 Subaru Legacy tell me if it will work with OBD II code readers? I've heard mixed reports, but one authoritative source indicates that only the automatic transmission models of that year are "fully" OBD II compliant. Could
|
| Timing belt tensioner | 20 May 2007 22:50 GMT | 5 |
I have a 2003 Baja and the local subie shop says a need to replace the tensioner.My mileage is about 55k.Does that seem right or am I getting hosed?Of course if it goes I'm in deep doo-doo.
|
| callapsed radiator hose | 20 May 2007 18:24 GMT | 1 |
I have a '99 legacy outback w/ 125K miles, it was overheating, temeprature gage quite high, but no boil over. I noticed that the top radiator hose was collapsing. Ok, old hoses, I thought. So I replaced hoses and still it would collapse. I also noticed the coolant overflow ...
|
| Good source for used/cheap motor parts? | 19 May 2007 23:54 GMT | 2 |
While trying to remove the left intake cam gear bolt the gear broke under my vise grip plier. Now I need a new gear. A new one is $70 plus shipping from 1stSubaruParts.com. What is a good source for a used one that I could get cheap?
|
| Subaru Owners Opinions Needed | 18 May 2007 13:53 GMT | 7 |
I'm putting together a new consumer site to help people choose the right car. There is no advertising on the site. There is a satisfaction survey for car
|
| "Tribeca goes mainstream" | 17 May 2007 18:31 GMT | 7 |
Tribeca goes mainstream Subaru has dramatically altered its 2008 Tribeca in this crossover SUV's third model year, clearly responding to criticism over styling that polarized faithful Subaru fans and other prospective buyers.
|
| Squealing Fanbelt on 88 XT-6 | 17 May 2007 04:11 GMT | 3 |
How do i adjust the fanbelt on my xt/xt-6? I see the slider bolt that should be the one, but I'm not sure where the lock bolt that locks it is. Any help?
|