| Thread | Last Post | Replies |
|
| Camry Oil Filter | 26 Oct 2004 06:10 GMT | 3 |
Last week. I stopped at our local Toyota dealer to get an oil filter for our 2003 Camry. I told the man behind the parts counter the year and that it was the 4 cylinder engine. The next day, I changed the oil and filter but did not notice until after I had already changed the ...
|
| 99 Camry 4cyl, noisy engine after water pump failure | 25 Oct 2004 06:15 GMT | 5 |
Maybe somebody in this group can help me out, here's my situation: My water pump seized up causing the timing belt to be shredded. Both the water pump and timing belt were replaced, but as soon as I left the repair shop I noticed that the engine was louder. Right around
|
| POWER STEERING LEAK CANT FIND | 25 Oct 2004 04:47 GMT | 1 |
can some one help me on a 97 camry I have a power steering leak on the left side that usually would leak just alittle more so when it got cold. I cant seem to see where it is coming from but it drips off the left
|
| Toyota Camry license plate screw stuck rusted | 25 Oct 2004 02:17 GMT | 3 |
I have a Toyota Camry 1999 that was sitting for about six months and I now want to start driving it. One of the screws for the rear license plate is stuck rusted. I can't seems to loosen the screw, but I need to get the screw out
|
| Tires for Camry | 24 Oct 2004 15:16 GMT | 2 |
I am thinking of a 05 Camry with the tire size P2156016. The car I am trading in has 2256016. Will the 2256016 fit on the camry with the P2156016 tire size??
|
| Floor Mats | 24 Oct 2004 04:35 GMT | 2 |
I bought my car used about 7 months ago , its a 95 camry. I was wondering where i could buy good floor mats for it cheap , i saw some originals on ebay but they were going for $100 a set. Being a broke college student i just want something to protect my interior.
|
| Cheap tire ? & observation | 24 Oct 2004 03:34 GMT | 4 |
Have an '03 LE 4-cyc. with the original junk Bridgestone Potenza RE92. Have noticed the outside edge wear on these tires and thought it was alignment or something with the Camry. But after a somewhat bored afternoon searching through tire reviews, I am finding that a lot of
|
| Brake Booster Test | 24 Oct 2004 01:11 GMT | 1 |
Per the 97 service manual it states that: Operating Check: a) Depress the brake pedal several times withthe engine off and check that ther is no change in the pedal reserved distance
|
| Building a mild Custom 94 Camry | 23 Oct 2004 19:24 GMT | 2 |
My Buddy Mike and I are building a mild Custom 94 Camry to be my Daily Driver. Saved it from the wrecking yard actually. I'm very happy with how good it's coming along, and I just bought a
|
| Engine light on | 23 Oct 2004 16:07 GMT | 1 |
Few days ago I got engine light on and then all of a sudden I got "traction OFF" light on. I took my car to AutoZone and they run diagnostic test for free. It came back with few codes like
|
| Aiming headlights on 1995 Camry | 23 Oct 2004 15:37 GMT | 3 |
Can anyone tell me how to aim the headlights on a 1995 Camry? TIA
|
| Red and green coolant | 23 Oct 2004 00:05 GMT | 3 |
I have a 98 Camry, 4cyc. it has those red coolant in it, can I mix green coolant with it? The owners manual didn't say anything....... Thanks Kenny
|
| AM/FM/CD/Cassette Combo What fits a '93? | 22 Oct 2004 16:47 GMT | 3 |
I have a '93 Camry wagon with the AM/FM/Cassette player in it. I'd like to replace it with a combo unit and have seem some Toyota units on Ebay. Can anyone guide me as to which model years would be interchangeable? I'd like to be able to pull the existing unit out,
|
| Optimum Idle RPM for Camry 2000? | 22 Oct 2004 16:42 GMT | 1 |
What is the optimum idle RPM for a 2000 LE camry? I think mine was previously 600RMP when it was idle and when I cleaned the air throttle and part of the long metal manifold that the air throttle hangs on to, the RPM jumped to 700 RPM.
|
| Stereo Harness95 camry | 22 Oct 2004 14:54 GMT | 1 |
My car got broken into a while ago and they took my harness and plastic pocket and all the parts. Im wondering where i could buy that stuff cheap , i would also like to get the U shaped plastic piece with the cigg lighter hole , they broke that when
|