| Thread | Last Post | Replies |
|
| 92 Camry 4 Cylinder ... severe vibration | 08 Dec 2004 22:02 GMT | 18 |
I have a 92 Camry, 4 cylinder, LE wagon with only 65,000 mi. Even after a COMPLETE tune-up, it vibrates severely when in gear and stopped and about half as bad when in park. At even slightly higher rpms (just over 1000) it smooths right out. I have replaced all three engine mounts ...
|
| A/C idle control on 3VZ-FE engine??? | 08 Dec 2004 21:56 GMT | 3 |
This is my first time in this forum :). Anyway i own a 1994 3VZ-FE Camry, just want to know is there a A/C idle control adjustment on my car? The reason i ask is that everytime when i try turn on the A/C, the idle speed will go up and down every 15 secs
|
| camry i4 1999 | 08 Dec 2004 21:54 GMT | 7 |
I test drove a Camry 99 very good condition, but noticed the dipstick didn't touch the surface of the oil. I had someone refill it, it took 2.5 qrts, half the amount of the oil bath, if I am correct. Car runs beautifully. What are the chances that a damage might have been done ...
|
| Reverse Gear Indicator is always On | 08 Dec 2004 21:50 GMT | 4 |
I have 1997 camry LE Yesterday, I dont know what happened. The reverse gear light is always on now, even when the car is running in D - ie, Drive gear.
|
| 95 xle door handle | 08 Dec 2004 21:48 GMT | 1 |
How hard is it to change a broken drivers door handle? Outside handle, door was frozen shut and it broke off. Thank you Scott
|
| Replace CV boot without pulling axle? | 08 Dec 2004 21:41 GMT | 6 |
Can you tell me how to replace JUST the outer CV joint boot, R.H./passenger side, 1990 Camry, V6 Auto. Boot ripped very recently, so joint is not yet dirty (I hope). I have a Chilton book, but it only covers replacing the entire joint. I'm wondering if I can replace just
|
| Camry/US 0r Asia?? | 08 Dec 2004 16:51 GMT | 7 |
Are camry's made in both the USA and Asia? If so, any truth that the Asian built are much better? Any way to know (ie. Veh ID #) where built? Thanks, Ron
|
| Tire Pressure | 08 Dec 2004 07:51 GMT | 6 |
I am running 1993 Camry 4 Cylinder. I just replaced all 4 tires with specs 195/70/R14. I saw the writting on the tire about max Pressure. I want to know how much I should inflate the tires. To what pressure. Is
|
| Size change on Camry Radio - What year? | 07 Dec 2004 20:57 GMT | 4 |
I drive a 94 Camry LE 4 cyl. In a previous post I was advised a 05 will not fit my camry. Does anyone know what year the size changed from what I have? Mine was made in Japan, if that helps. Please refer to previous post response:
|
| Camry Mileage | 07 Dec 2004 16:23 GMT | 18 |
I am running on 1993 Camry & apparantly it's giving very less mileage. Only 20 miles per gallon on highways & less in city driving. What can be the reasons for that & remedies.
|
| Powerlocks w/o battery? | 07 Dec 2004 00:40 GMT | 4 |
Something has been nagging me for a while now. We have an aftermarket security system installed with a remote auto-doorlock feature ('95 Cam). Works great. However, without disconnecting the battery and all those consequences, does anyone know if the door key will still open ...
|
| 1987 toyota camry for sale | 06 Dec 2004 17:00 GMT | 1 |
is there anybody interested by a 87 toyota camry? It runs but needs a new exhaust, belts... good for parts I need to sell it before i move out of the country Make an offer
|
| 98 Camry alarm shut off | 06 Dec 2004 12:59 GMT | 3 |
My girlfriend has a 98 Toyota Camry, she had a new battery put in and since this has activated the alarm system. She has been seting it off since and now hates her car. We have called three Toyota dealers and they all had different things to try but none have worked. Any help ...
|
| Head lamp Bulbs. | 06 Dec 2004 08:05 GMT | 10 |
I have a 95 4cyl CAMRY. The headlamp bulbs I think are H4 and 60/55 watts. I would like a bit more light for winter months.
|
| Removing interior door panel? | 05 Dec 2004 22:48 GMT | 8 |
I need to remove my driver's side interior door panel to replace my broken exterior door handle. I've removed the screws in the arm rest assuming it would loosen the arm rest which would then hang free. It won't budge. Also, how do I remove the plastic "cup" the interior door
|