| Thread | Last Post | Replies |
|
| factory rebates for 06 corollas yet? | 30 Sep 2005 19:36 GMT | 3 |
2006 corollas are available on the dealer's lot. I want to know if there are factory rebates available by toyota. i went to the toyota webpage, but couldn't find any info on the toyota 2006 factory rebates.
|
| Running without EGR | 30 Sep 2005 19:36 GMT | 5 |
My '94 4cyl camry was balking and stalling at idle. I disconnected the EGR, and got relief, so I'm pretty sure that's where my issue lies. Dealer agrees. In fact, the car runs better than ever. What are the repercussions of running without it? (we don't have emissions
|
| 2006 Camry 4 cylinder | 30 Sep 2005 08:36 GMT | 4 |
Does anybody have the 2006 4 cylinder camry and if so how good is the gas mileage. thanks Joe
|
| Camry For sale. | 30 Sep 2005 03:27 GMT | 2 |
1990 Camry. For Sale... 110,400 miles. Runs strong. Body has quite a bit of rust, but in process of being repaired. Tach, and indeglo guages. new brakes, tires, rotors. New tranny fluid and oil 1500 miles ago.
|
| Valve Stem Seals Replacement | 29 Sep 2005 19:16 GMT | 12 |
1991 4cyl 3SFE DX auto 104KM During the last 4 years I tried to get used to the smoke during start-up. The car runs great and passes the CA emission test like a champ. Nevertheless, I am still getting embarrassed every time I start the car.
|
| 92 Camry XLE | 29 Sep 2005 14:12 GMT | 14 |
I just got my license. We’ve had this car for over a year now, bought it from my brother’s friend. It ran fine. All of a sudden, as I was driving it yesterday afternoon to my mom’s house, it started making a funny sound.
|
| 97 Camry Plastic Probem | 29 Sep 2005 02:48 GMT | 2 |
I have had a problem with the plastic in the Camry 97 XLE. Bothe of the visoe mirrors ahd had plastic pinsrip on bothe the passanger and drivers doors. Another problem tht concerned me creatly was that the plastic mount for
|
| cooling fan problem | 28 Sep 2005 23:21 GMT | 4 |
I've been noticing that my car has a tendency to overheat for some time (a few months maybe). I finally investigated it and found out that my cooling fan wasn't coming on, even though the car was clearly getting hot. I went through the electrical schematics, and figured out that the
|
| Which is the best Camry year? | 28 Sep 2005 18:29 GMT | 8 |
Well, let me qualify this a little better. Which is the best year for the Camry for the least problems (as far as complaints on the NHTSA website) AND owner satisfaction? I currently own a 2005 Camry SE and have discovered serious problems
|
| 99 Camry front directional bulb keeps burning out | 28 Sep 2005 00:37 GMT | 7 |
Help I need some thoughts. The front right directional signal bulb has burned out twice in 3 weeks. This 2 filament bulb loses one filament and then triggers a rapid blinking directional signal only when the headlights or parking lights are on. This
|
| 2005 V6 Hesitation | 28 Sep 2005 00:37 GMT | 4 |
Always use high octaine fuel in my V6...lately notice a hesitation, then surge when coasting at about 30mph then hitting gas lightly. Any ideas?
|
| '04 Camry SE dash lights seem very dim? | 28 Sep 2005 00:37 GMT | 1 |
I have a 2004 Toyota Camry SE (silver dash with orange backlighting). The backlights seem very dim (or hard to read), even though they are turned up to the highest brightness. Even the odometer is difficult to read. Is this considered "normal"? Is it just the combination of the ...
|
| 90 camry | 28 Sep 2005 00:36 GMT | 5 |
I have a 1990 camry, and when i am driving, there seems to be a rattle before the shift. sounds like tin or metal. anyone kno what this could be? mernst4@wi.rr.com
|
| Sluggish acceleration and brake question | 27 Sep 2005 23:31 GMT | 3 |
I've driven Accords so long I don't know what other vehicles are like to drive :-) I have a 2005 Camry with 9000 miles, bought it with 5000 on it as a demo. It seems that the acceleration and breaking require more travel on the
|
| 94' camry w/ no reverse | 26 Sep 2005 16:27 GMT | 8 |
well i bought a 94 camry and the reverse didnt work. so after driving i the reverse still kind of works but you have to rev it up to about 400 RPMs and it will go back slowly. but i have heard that there is a adjustment on it??? any ideas will be helpfull
|