Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Toyota / Camry / November 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
no brake lights on 89 camry10 Nov 2005 22:50 GMT4
My brake warning light has come on and none of my brake lights are
working (normal tail lights work). Bulbs look okay. I read that a
common problem is the lamp failure relay. I checked the voltage there
and it was 0.1 V when the brakes were off and 12 V when the brakes were
90 V6 fans won't stop running10 Nov 2005 22:34 GMT3
Proud owner of 1990 V6 wagon.  Yesterday went on a long drive, got to my
destination and the fan motors did not stop running.  Any suggestions on
how to fix?......thanks
How to Change engine oil in home10 Nov 2005 17:02 GMT7
I just bought a 1999 toyota camry. The engine oil was black. it seems
that the engine oil need to be replaced as soon as possible. By reading
the posts here, I decided switch to a syenthetic oil which is better
than the mineral oil. I bought Mobile 1.
drivers mirror08 Nov 2005 02:23 GMT1
Don't know the real answer but I expect the US one has a stupid message
on it.
97 Camry rear engine mount08 Nov 2005 01:08 GMT2
I was wondering if anybody has changed the rear engine mount on a
97-02 camry?  I have seen several posts where it has been done on the
93-96 camry.  I am curious as to how to get the mount out and how to
remove the top nut retaining the mount.  I assume that you use an
Driver side mirror - US .vs. Japan08 Nov 2005 01:00 GMT2
Is there a difference between the japanese driver side auto mirror and
the US driver side auto mirorr?
v6 overheted07 Nov 2005 18:03 GMT2
My 97 v6 overheated and the engine died. I have checked these things and
still the engine spins, but will not start. What else can I check?
Spark        Good
Fuel supply           Good
Not equal wear of rear drum shoes07 Nov 2005 18:02 GMT1
Camry 95 with rear drums, 193000 miles.
I noticed my shoes are not equally worn.
They seem to be thiner on the upper side.
Is this normal ? I figured this could be
Check Engine Light on 99 Camry07 Nov 2005 16:45 GMT4
The Check Engine light on my 99 camry came on at 116,000 miles. I took it to
the dealer who said the problem was the
emission control valve. He charged $164.00 and replaced the control valve.
Two days later the Check Engine light came on
Out of ideas07 Nov 2005 04:28 GMT4
Have a 96 toyota camry that has 150k miles on it.  Last week replaced the
cv joints the tires, the drivers side rear strut and had the wheels
aligned.  This week when I accelerate the car over 70mph the vehicle
shakes violently.  Only though when I am accelerating.
Anti-Freeze Flush: how to do at home07 Nov 2005 04:24 GMT2
I would like to flush out and renew the anti-freeze mixture (green) in
my 1996 Camry station wagon (150,000 miles) and would like advice on how
to do this properly at home.
Here's what I'm guessing I could do, using a variation on the multiple
Carpet relacement or Odor removal07 Nov 2005 04:23 GMT1
My 2000 Camry creampuff which still had that new car smell now stinks. My
sister left a quart of milk under the front passenger seat. It leaked and
soaked the carpet completely.(3 days before I noticed it.)
I soaked it up with paper towels, sprinkled baking powder into it, let it
87 Camry Fuel Filter Replacement06 Nov 2005 15:14 GMT13
Is anyone familiar with this procedure?
I am not very familiar with cars, but I am told this is like a 10 min
job I can do myself. I can see the fuel filter under the hood and I can
see the to lines running to it, but I was reading something about
Oil pan gasket change - RTV or pre-molded gakset?06 Nov 2005 15:09 GMT2
I just purchased a new oil pan gasket for a '97 4cyl camry.  It is the
cork and rubber type.  I have done some research and have found the
this model used a FIPG (form in place gasket) or RTV type.  My
question is, should I use the cork gasket or use the silicon FIPG?  I
Camry CE 2000 stall06 Nov 2005 13:55 GMT2
Just bought a Camry 2000 CE, and it runs great.
When I go down a long hill, to save gas, I put the car in neutral and let it
coast.   every once in a while, my engine stalls.  This is the only time it
ever stalls.
Pages: 1 2 3 4 5 6 7 8 October, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.