| Thread | Last Post | Replies |
|
| washer pump | 25 Dec 2005 19:44 GMT | 1 |
where is it located 1996 camry
|
| intermittent power loss - 93 Camry 4 cyl | 25 Dec 2005 08:57 GMT | 5 |
Experiencing loss of power / engine stall between 1000 to 2000 rpms. Sometimes starts right up, other times difficult to start. New distributor installed a week ago along with new plugs and wires, but problem persists. 222,000 miles so far with relatively few problems other than ...
|
| O2 sensor? | 25 Dec 2005 02:08 GMT | 10 |
Is there any special trick I need to know about to replace the oxygen sensor on my '95 4-cylinder Camry? My mileage has dropped to 24 mpg and a friend suggested replacing the sensor will improve it.
|
| 2000 Camry XLE V6 Question - PCV valve | 24 Dec 2005 17:00 GMT | 2 |
Does any body knows if this model has a PCV valve or not? If so, where is it located? Thanks.
|
| Scheduled Maintenance Question | 24 Dec 2005 04:36 GMT | 9 |
I have a 2004 Camry that I took in for the regular 40,000 mile scheduled maintenance at Green Toyota in Springfield IL. I have always had it maintained there and used the scheduled in the 2004 Scheduled Maintenance Guide put out by Toyota. The maintenance scheduler called out ...
|
| When door opens lights sometimes do not go off | 23 Dec 2005 21:33 GMT | 4 |
99 Camry, every once in awhile. Is there a fix?
|
| Rattle vibrating spring sound in 05 Camry | 23 Dec 2005 16:45 GMT | 3 |
My 05 Camry has a sound when I go over vibration type surfaces the best I can describe it is like a metal spring vibrating on glass. The strange thing is that my 01 Camry and my 98 Corolla had the same noise. In those cars I thought it was the light sensor. It is especially ...
|
| seeking torque rating for rear sway bar end links on 1994 Camry | 23 Dec 2005 15:28 GMT | 6 |
I have a 1994 Camry with 4 cylinder that is making a clunk from the rear end. I checked the sway bar end links, one is solid and the other is leaking oil or grease and makes metal to metal contact. I have never seen a sway bar endlink that contained oil, they have
|
| 92 Camry - Fuel Smell | 23 Dec 2005 04:19 GMT | 4 |
My 92 wagon just started smelling like gas. I am sure there isn't a leak as 1) The fuel tank builds pressure while driving. (I get gas after driving and when I remove the cap there is slight built up pressure) 2) There are no drips 3) Fuel mileage is excellent as always 4) The ...
|
| Dash light adjustment | 23 Dec 2005 03:20 GMT | 1 |
Does anyone know if the brightness of the dash lights can be adjusted with respect to the radio lights. On a dark night, when I turn the brightness up enough to be able to read the radio display, the dash lights are glaringly bright.
|
| Fujitsu Ten Type B...CD player | 21 Dec 2005 17:03 GMT | 1 |
I have acquired a second hard Camry with the above Radio/Cassette player. It has a CD button on the console but no CD slot. It appears that this is for a CD stacker....is that correct??? In the boot there is a wire harness hanging out.
|
| Strange Engine Stalling | 21 Dec 2005 16:57 GMT | 1 |
1992 Camry V6 Stalls when the nose is pointed in the air. If stopped at a stop sign pointing up an incline the engine will stall. Especially noticeable when car had front wheels on ramps for an oil change. Would not stay running under 2000 rpm. Runs fine otherwise. Any ...
|
| Mobil oil | 21 Dec 2005 16:50 GMT | 3 |
Hi guy, I use to change the oil by myself using Mobil (the regular type 5W30), bought it from Costco or Wal-Mart. Recently when trying to replenish the stock, I had the surprise to find that
|
| Oil leak additive effectiveness and related question | 21 Dec 2005 16:40 GMT | 3 |
My 1986 Camry had been burning about a quart of oil every 500 miles. Last Monday, I filled it with oil at least up to the oil dipstick full mark, probably past it. The next day, about noon, after having driven it about 300 miles, I noticed
|
| 95 Camry ignition cutoff circuit? | 21 Dec 2005 15:06 GMT | 2 |
I have a dealer installed LoJack alarm. I have figured out from poking around with it that the car has an ignition cutoff circuit that makers of alarm systems use. Can somebody tell me how that works? I'm having electrical problems involving the LoJack and corroded wires.
|