| Thread | Last Post | Replies |
|
| 91 camry 4 cyl fuel filter question | 14 Feb 2007 18:51 GMT | 1 |
I am having a terrible time trying to remove the bottom connexion from the fuel filter. I replaced it a few years ago but it needs replacing again. Is it possible that this connexion is a left hand thread?
|
| Camry points to look for | 13 Feb 2007 14:34 GMT | 2 |
My 1991 Honda Civic died an early death when the water pump siezed. Should have had 25K more before the T-belt needed replacing but that is life. I have a chance to buy a one owner 1993 Camry with 175K for just under
|
| had brakes adjusted - how to undo? | 13 Feb 2007 02:11 GMT | 20 |
I took my '96 Camry to Brake Masters a year or two ago for a brake fluid flush. While there, the guy told me that the rear brake pads were essentially new, and he offered to "adjust" my brakes to have the rear brakes share the braking load some more. Having gone through
|
| ICV problems | 13 Feb 2007 02:01 GMT | 5 |
Camry 99 occasionally stalls on cold days unless gas is applied. Dealer diagnoses as problem with ICV replacement goes for 121 for valve cover gasket and 565 for the valve itself. 686 for the whole thing total. Otherwise the car will supposedly be undrivable any
|
| How do I replace front left blinker bulb? | 13 Feb 2007 00:08 GMT | 2 |
I have a '97 Camry LE. I'm not a complete idiot, yet I cannot figure out how to replace a blown blinker bulb. Any thoughts or am I going to have to break down and take it somewhere?
|
| Radiator fix | 12 Feb 2007 01:54 GMT | 16 |
The plastic top has a hairline crack and leaks, Can Epoxy be used at 20f, will epoxy even work. Might silicone sealant work globbed on.
|
| '92 Camry power windows frozen | 10 Feb 2007 15:41 GMT | 1 |
It's real cold and my power windows are frozen closed. Can I help anything with lubrication?
|
| brake fluid line flushing caps | 10 Feb 2007 15:29 GMT | 3 |
When I flushed the brake fluid in my wife's '99 camry, I noticed there were rubber caps / stoppers covering the bleed valves. These rubber caps are missing on my '96 camry. Probably the mechanics lost them, when I paid them to flush my fluid.
|
| 1991 engine question | 10 Feb 2007 01:36 GMT | 3 |
1991 4 cyl engine marked "TOYOTA 2000 16 valves" Does this identify the engine as a 3SFE? Need a fuel filter and there a 2 choices for 2 different engine possibilities.
|
| 1998 Camry.... a few questions | 10 Feb 2007 00:20 GMT | 7 |
My first post on this group. I recently bought a '98 Camry LE and had a few questions. 1) What is the interval for replacing the timing belt? The car had no manual (though I have one coming from E-Bay). The Camry has 190,000
|
| Blown Fuse? | 09 Feb 2007 21:16 GMT | 3 |
I have been experiencing some trouble with my parking lights on my '98 Camry. They have been flashing a couple of times every ten seconds along with my dashboard lights, even while the car is turned off. I don't have an owners manual and can't find any information on what
|
| Camry BRAKE indicator on in Dashboard. | 09 Feb 2007 02:31 GMT | 5 |
I have a 2000 Camry CE. Its 'BRAKE' indicators are coming up in the dashboard. There is no issue in the brakes as I feel or, when I use it. Also, it does not stay 'on' all the time. it comes off and on every two or three minutes.
|
| how do the rear drum brake adjusters work? | 08 Feb 2007 01:52 GMT | 2 |
I took a look at www.turboninjas.com/camry/br.pdf, and I'm stuck somewhere on page 40-41. How exactly do I adjust the brake adjusters? Do I just use a flathead screwdriver? Are the left and right adjusters adjusted the same way, or do they
|
| Brake is not smooth, 2007 Toyota LE 4 cylinder | 07 Feb 2007 06:36 GMT | 1 |
I just got one 2007 Toyota LE 4 cylinder about two week ago. It is a good car. However, I found that brake is behaving a little strange recently. I can feel that there is a very short and obvious resistance in the middle when I push brake. Is it normal? Or I
|
| car stalls | 07 Feb 2007 06:30 GMT | 1 |
I am having problems with my LEXUS ES 300. When i leave the gas pedal the car dies... it starts up fine but doesnt come back to the normal idle speed. Please HELP>>>
|