| Thread | Last Post | Replies |
|
| starter | 19 Apr 2007 23:50 GMT | 9 |
Hi I have a 90 Camry.My starter is going up and I remember on my Toyota pickup replacing just the contacts on the starter.I received the info from a guy on the web .Can anyone give me a heads up on the part no.and instructions on replacing the contacts on my Camry?
|
| coolant hoses to idle air control valve | 19 Apr 2007 18:44 GMT | 7 |
One good thing, I guess, about monkeying around the throttle body and idle air control valve, was that I discovered two additional coolant hoses that I'd missed. I'd already changed the top and bottom radiator hoses, and 3 coolant
|
| How I Solved My Camry's Stalling Problem | 19 Apr 2007 03:43 GMT | 18 |
The Problem: About a year ago, my '96 Camry (141,000 miles) would stall - only when warm, only when approaching a stop light or stop sign, and only after being driven at least 7 miles. RPMs would fluctuate between 250 and 750 RPM; throwing the transmission into
|
| How to remove EGR valve? | 19 Apr 2007 00:30 GMT | 15 |
I'm trying to remove my EGR valve for cleaning ('96 camry, 141k miles, 4-cyl). There's one nut connecting the exhaust pipe to the EGR valve, that I absolutely cannot get off. I tried a plumbers' wrench, to get down that far - just can't get enough torque on that nut.
|
| hoses | 16 Apr 2007 18:23 GMT | 5 |
I'm planning on replacing the coolant hoses to the IAC, hidden under the throttle body. My car is a '96 Camry, 141,600 miles. Planning to keep it until it falls apart (until the cost of future repairs greatly exceeds the
|
| '98 Camry: smoke puff when starting the car | 16 Apr 2007 17:49 GMT | 12 |
I've just recently purchased a '98 Camry with 148k on it. The car i driving really well and passed a smog check with flying colors However, I noticed that when starting the car a dark smoke puff come out of the exhaust. It's only a momentary thing; there's no more smok
|
| screw spec - idle air control valve | 16 Apr 2007 16:01 GMT | 15 |
Anyone have specs on the screws used to hold the idle air control valve to the throttle body? pitch, threads, bolt diameter, etc.? Trying to replace with hex bolts. Thanks,
|
| 90 Camry Slow Battery Drain | 16 Apr 2007 15:15 GMT | 7 |
My 1990 Toyota Camrey LE with just 70,000 miles on it and in excellent condition won't start when not driven for 7 to 10 days. Battery and altenator check o.k. Toyota mechanics have not been able to pinpoint the cause. They told me to leave the car with them but cannot guarantee ...
|
| 99 Camry A/C makes Whistle Sound | 16 Apr 2007 05:01 GMT | 2 |
I just observed couple days back that my A/C makes a little Whistle sound when i put on Maximum. It works very good. Why is that making little noise..? is that some thing that i need to fix before it will run into any other problem.
|
| ' 86 Camry, control arm bushing's. Easy DIY job? | 16 Apr 2007 04:12 GMT | 5 |
Purchase a used 86 Camry for my daughter, has only 107,000 miles on it. The control arm bushings are definitely shot, I can watch them slide back and forth by rocking the car. How big a job is it to change these? Found the bushings on line for $50 +- a set, is it worth paying
|
| Power Seat Faliure!!!!!! | 16 Apr 2007 03:57 GMT | 3 |
2003 Camry - the driver's power seat has stopped moving forward- backword horizontally.It's all the way up to the steering column after cleaning the back seats!!! It can still tilt and go up/down. I can hear a
|
| windshield 2002 | 16 Apr 2007 03:39 GMT | 6 |
how much would a windshield replacement of a 2002 camry cost, labor and parts? what would be the most economical solution? thanks
|
| my dash-board transmission light is wrong | 15 Apr 2007 06:21 GMT | 2 |
Something strange happened to my 1997 Camry, 4 cylinders: When I shift to Drive, the dashboard light for Neutral get lit, instead of the light for Drive. Check Engine light is also on. What may be the problem? Thanks. T.I.
|
| Camry or Nissan | 15 Apr 2007 05:25 GMT | 9 |
My S.O. is trying to choose between a Nissan Altima 4 cylinder and a Toyota Camry 4 cylinder. She test drove both cars briefly but would like to know the pros and cons of each better. Does
|
| removing the rotors for replacement or grinding 94 camry | 15 Apr 2007 05:16 GMT | 7 |
I AM TRYING TO REMOVE THE FRONT ROTORS FOR 94 TOYOTA CAMRY THE CALIPERS COME OFF EASILY BUT CANNOT SEEM TO GET THE ROTORS OFF, IS THERE ANY HIDDEN BOLTS OR SET SCREWS.
|