Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Toyota / Toyota Trucks / September 2003

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Studding tires10 Sep 2003 16:54 GMT3
I had a set of steelies and Dunlop tires come with my 03 Taco. I immediately
replaced with alloys and BFG All Terrains within 24 horus of getting the
truck. So these Dunlop tires have <40 kms on them.
Can I get these studded?
87 body swap10 Sep 2003 03:46 GMT1
hello everyone, i just bought a wrecked 87 pu from a buddy of mine for
$500.  there is no frame damage just some left side cab damage.  I
have an 86 that has no motor and was wondering how hard it would be to
swap one (86) for another (87).  I would have to swap the vin plate,
Fiberglass bed replacement10 Sep 2003 02:39 GMT1
Any one know the name of the shop in New Hampshire that makes and sell glass
beds? 86 short bed.
Or any links to beds in the New Hampshire area?
Thanks
Fuel filter life on 22RE10 Sep 2003 00:40 GMT3
I am sometimes surprised by mechanics who do not want to sell me work.  This
is one such case.
I have a 93PU 2WD with the 22RE, 190000 miles.  The fuel filter is original.
For various reasons, nobody I have approached is eager to change it.  I
Riddle Me This! (Brakes)10 Sep 2003 00:31 GMT1
This is the 3rd time I posted this and none has appeared. So if this
appears multiple times, I apologize in advance. I have bad newserver..haha
I have an 83 Toyota 4 speed 22r truck/camper. Approximately 3000 miles ago
had brakes
How to replace the antenna mast for 98 4Runner?09 Sep 2003 22:23 GMT5
What is the fastest/easiest way to do this?  What tools do I need?
TIA
4Runner won't start?!09 Sep 2003 20:36 GMT4
Hi this is my first post, and was wondering if you could possibly help or
point me in the right direction... I was driving my 86 4runner about a week
ago. I ran it about half a mile and all the sudden it died. I haven't been
able to restart it since... I checked the spark and that's ...
gasoline gouging09 Sep 2003 03:50 GMT8
starting on friday sept. 12, Americans will boycott all Mobil gas stations.
the boycott will last until Mobil reduces their prices back down to reality.
other stations will be targeted after Mobil.
the only way to send a message is to act.
taco turbo09 Sep 2003 03:44 GMT5
What effect do the common turbos have on fuel mileage of the '03 V6's?
John Doe - no the other one....
help engine flush09 Sep 2003 03:22 GMT6
hi i recently blew the head gasket in my 4runner which i am replacing myself
what i would like to know is how do i flush the engine of  any antifreeze
that has seeped into the motor
Bedliner - Line-X vs Rhino09 Sep 2003 01:35 GMT5
I just bought a 2003 Tundra and am considering a sprayed in bedliner. I'd
like to get feedback from the newsgroup about the Line-X and Rhino products.
Also, if there are other products that are better than either of these, what
are they? The Rhino seems like it will stop things from ...
The Basics of Offroading.09 Sep 2003 01:12 GMT10
Hello, I am 16 and I have a Toyota PU '88 4x4 EFI. I'm going to be doing
a lot of 4 wheeling. The thng is, I do not know a lot about off roading.
I do a lot of it on my ATVs, so I use common sense.
When is a good time to lock the hubs? What is 4-High and 4-Low mean and
03' 4-runner sulfer smell08 Sep 2003 23:55 GMT5
  I am experiencing a sulfer like smell when I accelerate.  It appears
to be originating from the exhaust.  Anyone else with the same problem?
Any guess to what may be the cause?  I'm thinking it may be the
catalytic converter.
Best Taco Shell?08 Sep 2003 16:46 GMT3
  I've got a 2003 4WD Tacoma Extra Cab and  thinking about getting a
fiberglass shell for the back.
  Who makes the best shell? I've seen alot of Snugtop's and a few
Leer's. I'm looking for the good  value and something that'll last a
timing belt/chain replacement08 Sep 2003 16:42 GMT10
       Question to the group:.........Is changing the timing belt/chain?
something that can be done fairly easily on my '88 toy p/u 22R? ........I
did one on a Pontiac about 10 years ago; and remember having trouble with
the oil pan and timing cover lining up and going back on.  ...
Pages: 1 2 3 4 5 6 7 8 9 10 August, 2003
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.