| Thread | Last Post | Replies |
|
| Earning FREE Electricity & Gasoline for Life | 08 Jul 2004 02:32 GMT | 2 |
http://krystal-planet.com The Multi-Trillion Dollar Energy Industry is: . The largest industry in the world - by far.
|
| Synthetic vs. Regular Oil? | 07 Jul 2004 19:33 GMT | 13 |
What are the advantages and disadvantages of using synthetic motor oil instead of the regular type? Does it really give better motor life as some claim? How often should it be changed?
|
| Rust removal on 1987 4x4 PU | 07 Jul 2004 18:23 GMT | 6 |
I just bought a 1987 Toy, cab is in great condition, no dents no rust that I ca see. The bed, of course, has rust in front of the left rear wheel and around the fuel cap lid area. Does anybody have any info on how to remove the rust? I think it is completely through the outside ...
|
| Leveling Kits | 07 Jul 2004 14:08 GMT | 2 |
Anyone have experience with Leveling kits on a Tundra? Are they easy to install, or is it best left to professionals? -Cyberbilly
|
| Lights won't go off? | 07 Jul 2004 08:48 GMT | 2 |
Still tracing down a few mysterious electrical and perhaps other problems with my 83 4x4 pickup, maybe someone can help with this one? Start the car and the battery and brake lights stay on. I replaced the alternator and had it checked, it's outputting ok, then I was told
|
| Toyota 22R | 07 Jul 2004 06:04 GMT | 1 |
Bought an 80 4x4 2wks ago, perfect body and interior.... bad eng. Previous owner claims the eng is an 85 #(1883362), and the 5spd is an 83-84??? I don't have the time to re-build, and want to drop in another 22R. My question is, what years eng and 5spd trans match up to each
|
| power problems on a "91" 22 RE | 06 Jul 2004 17:11 GMT | 4 |
I just changed the timing chain and gears on a 22 re as the head gasket was blown and when I went in to change it I found the timing chain dampeners were broke and the tensioner was worn. My problem now is...
|
| 03 Tundra Extended Warranty transfer question. | 06 Jul 2004 17:02 GMT | 1 |
I have bought a 2003 Tundra, and the original owner explained to me that he had purchased a transferable Extended Warranty ( ...how long extended ? ), for 7 or 8 hundred bucks, and it will transfer to me. The seller filed the form or notice to Toyota and two months have passed ...
|
| After market grill for 2003 Tundra? | 06 Jul 2004 15:15 GMT | 2 |
Never have liked the redo of the grill treatment, though I love my Tundra. Anyone know of an after market alternative?
 Signature SKH
|
| mixing oils | 06 Jul 2004 03:07 GMT | 7 |
Is it safe to mix synthetic and normal oil together? also, can i switch from normal to synthetic back to normal again when i change my oil without causing anything to go wrong?
|
| Tinting Question | 06 Jul 2004 02:55 GMT | 5 |
I have a '90 4-Runner with tinted windows. I recently noticed a "dot" pattern on four of the windows with no pattern on the other two. I took it to an auto tinting place and asked what was causing the problem. They looked at the window and didn't see anything. Then one of the ...
|
| Help Help it just disappears.. | 06 Jul 2004 02:29 GMT | 6 |
On my Toyota 4Runner 1995 V6 4WD the water level in the rad goes down.. There are no leaks there is no water contamination in engine oil or in the radiator. SO its safe to say that the head gasket is OK. I have noticed that when I start my engine it idles rough for a
|
| 2001 Land Cruiser Seat problem | 06 Jul 2004 02:20 GMT | 2 |
The driver's seat in my '01 LC started to bind on one side. My wife is shorter than myself, so we are constantly moving the seat back and forward. During the regular oil change at the dealer, we had them check out the problem. They say the seat rail track assembly needs to be ...
|
| High idle on '89 4x4 Toyota PU | 05 Jul 2004 05:34 GMT | 6 |
Have a problem with an '89 5-speed 4x4 Toyota pick-up. The idle seems to get 'stuck' and idle high a fair amount of the time. Not just when starting cold. The cable and throttle plate assembly seem to move freely.
|
| Bolt-On Lift Kit for '88 4Runner | 04 Jul 2004 19:41 GMT | 9 |
I want to purchase a good bolt-on lift kit for my '88 4Runner. Anyone have a suggestion of what to get and where to buy it? I don't know enough about how to do this to allow me to pick out the individual parts myself - I would feel much better with a kit, knowing that
|