Dealer says it is due to "out of round" gas filler tube. They're ordering a
replacement. Why, after 9200 miles, did this out of round tube just start
causing codes? Any one else had this problem or diagnosis?

Would anyone know where I can view the instruction on installing the D-Cab:
RS3200 Plus alarm upgrade? I got the kit but no instructions on what goes
where.
--

I have a 94 4Runner 3VZE 5 speed that is starting to jump out of gear in
first and third.
150k. Any thoughts?

I'm interested in buying a set of used wheels and tires for my 98
Tacoma. Preferably alloys, not steel. Close to Maryland would be best.
Respond to skougoures@netscape.net

Last night I seen a new commercial for the Tacoma.
It was in an arena with monster trucks. The monster
truck was going to jump some cars and the Taco pulled
up next to the cars and the monster truck hit it,

98 Tacoma manual hubs  transfer case is stuck in 4x4. Shifting through
gears does nothing to alleviate the problem. what is wrong? (glad it has
manual hubs!)

4Runner, v6 automatic, floor mounted gear selector feels really sloppy /
loose. Anyone had this problem?  Anyone fixed it?
Shifting action itself (mechanical operation of the tranny) is fine, it's
just the action of the lever.

I'm replacing the stock Cassette/CD unit with a Sony Xplod. I can't find what
the wattage is of the stock door speakers (I have the AM/FM/C/Cassette and 4
speakers in an Xtra Cab.) Eventually I'll replace them, but for now I just
want to make sure it can handle 50 W per channel.

Before I put another 22re in my 4runner, I'd like to put a double timing
chain/gears on it. The engine is an 85. Can i go into the auto parts
store and tell them I have a '78 Hi-lux pickup with a 20R and get the
double timing chain that way and have the thing fit? Will this year ...

I finally joined the club and bought a 2004 4Runner this morning.  Picking
it up on Monday evening.  It is a 4WD SR5.  Can't wait to get it out on the
hunting lease.
Scott

I'm swapping out my bench for 2 buckets but there are only 3 holes.
What kind of safety issues am I facing if I install the seats with
just 3 bolts?  Is the only other solution to drill a hole for the 4th
bolt?  It's a little odd; there's a metal knockout-like plug where the

I want to convert my 87 auto 4runner into a stick. I have an 85 truck
and I wonder if the tranny and transfer case from the 85 straight axle
truck will fit in the 87 or must I change out the axle too?

All,
Just pick up my Sequoia last night. Love the truck ! The truck has 87K
miles. I figure its time to change all fluids since I am not sure when
the previous owner did this. My next door neighbor offers to get a few

Anyone know where to find a rear end lowering kit for a 1998 T100?

I had an 84 Xtra Cab deluxe and now a '93. I went shopping yesterday
for a new one as I don't want the bigger one coming out next year. I
wasn't very impressed. The handling doesn't seem as good as my '93 and
mot much has changed otherwise. Seems to be the same shitty bucket